Národní úložiště šedé literatury Nalezeno 15 záznamů.  1 - 10další  přejít na záznam: Hledání trvalo 0.00 vteřin. 
Metodika tradičního opracování stavebního dřeva pro konstrukční opravy historických staveb
Kloiber, Michal ; Růžička, Petr ; Tippner, J. ; Kunecký, Jiří
Publikace se věnuje metodickému popisu tradičního (ručního) opracování dřeva pro konstrukční opatření při opravách historických staveb. V metodice jsou prezentovány výsledky experimentálních testů při těžbě dřeva v různých ročních obdobích (zima, jaro, léto), při opracování různými způsoby (řezání, štípání, tesání a kombinace tesání s plavením), při ověření eliminace růstových napětí při výběru dřeva a opracování (výběr dřeva bez přirozených vad a úmyslné zásahy při opracování). Výsledkem je metodika, která respektuje standardy z oblasti ochrany kulturního dědictví, zejména pak požadavek na minimalizaci zásahu do původní hmotné substance a zachování původní technologie opracování nově vkládaných prvků včetně výběru materiálu. Vlastní metodika popisuje předpoklady použití a nutné okrajové podmínky, výběr materiálu, manipulaci a skladování kulatiny, technologii opracování (tesání, štípání a řezání), skladování opracovaných prvků až po samotnou konstrukční sanaci, kde je na konkrétních příkladech konstrukčních prvků předvedena minimalistická varianta zásahu do původní materie za použití tradičně (ručně) opracovaného dřeva.
Plný tet: Stáhnout plný textPDF
Podélné štípání kulatiny při opravách dřevěných konstrukcí
Kloiber, Michal ; Hrivnák, Jaroslav ; Bryol, R. ; Tippner, J.
Ve spektru dosud používaných technologií chyběl popis tradičního řešení podélného štípání kulatiny, které bylo v minulosti často používáno za účelem využití maximálního objemu vytěženého dřeva při stavbách (především roubených staveb venkovského prostředí). Podélné štípání jednak podporuje udržitelnost tesařského řemesla a zároveň umožňuje vytvoření přesné repliky původního prvku (rozměrově, tvarově, technologicky). Výzkum proto směřoval k návrhu postupu prakticky využitelného a aplikovatelného v běžné praxi při opravách dřevěných konstrukcí, zejména historických památek. Takovým postupem je podélné štípání za použití klínů (kovových i dřevěných) a palice. Cílem památkového postupu bylo prakticky popsat technické řešení, technologický postup podélného štípání kulatiny, který umožňuje použití pouze ručního nářadí a nástrojů. Postup přednostně respektuje standardy z oblasti ochrany kulturního dědictví, zejména požadavek na minimalizaci zásahu do původní hmotné substance, při vysoké přesnosti reprodukovatelnosti původních vlastností konstrukčních prvků.
Plný tet: Stáhnout plný textPDF
Creep behavior of oak pegs under tension in dry and wet conditions
Kunecký, Jiří ; Kloiber, Michal ; Hasníková, Hana ; Hrivnák, Jaroslav ; Sebera, V. ; Tippner, J. ; Milch, J.
Carpentry joints equipped with oak pegs are well suited for applications where increased moisture is not a significant factor. However, for the use in outside conditions, e.g. in the repairs of historical timber bridges, the pegs connecting the two halves of the joint may deform and change their original shape. This happens especially during long-term loading and can be augmented significantly by environmental changes. Creep behavior can play a crucial role for some types of carpentry joints, especially when precise contacts of faces in the joint are required. The paper deals with experimental testing of creep behavior of 16 mm oak pegs under dry and wet conditions loaded by the combination of shear and bending between two planks made of spruce in the direction parallel to grain. The results show that the decrease of theoretical stiffness values over time plays a significant role in the force redistribution in the joint especially due to moisture effects (drop 50-70% of the original stiffness).
Mechanical analysis of scarf joint fastened using cylindrical wooden dowel
Tippner, J. ; Milch, J. ; Kunecký, Jiří ; Kloiber, Michal ; Brabec, M. ; Sebera, V.
Traditional all-wooden woodworking joints play an important role in the behaviour of timber structures. These joints are also widely used when historically valuable constructions are being reconstructed and the connections are usually the masterpieces that testify to the high carpentry skills and knowledges of the overall mechanical behaviour. Within historical timber structures traditional carpentry joints were used while wooden dowel fixed mutual position of elements. Main aim of this study was to contribute to knowledge base about prediction and analysis of the mechanical performance of frequently used scarf joints made from spruce wood fastened using oak dowels. The objectives were to determine the joints' slip moduli and load-carrying capacity by means of theoretical and experimental approaches, in next to assess the mechanical behaviour of dowels through experimental investigation, and finally to perform a strain analysis of dowels. For these purposes, the optical technique employing three-dimensional full-field digital image correlation was used. The experiments were done on the full-scale specimens meeting the requirements of European standards (EN 383 and EN 26891), which were made from Norway spruce (Picea abies L. Karst.) and English oak (Quercus robur L.). The mechanical load consisted in tensile parallel and perpendicular to grain direction within the main components. The results of this study showed good correlation between theoretical approach based on based on Beam on Elastic Foundation theory and European yield model theory and experimental observations.
The Cloak Bridge in Český Krumlov – measuring of mechanical properties
Kloiber, Michal ; Sebera, V. ; Hrivnák, Jaroslav ; Tippner, J. ; Kunecký, Jiří
Timber bridges are often exposed to harsh conditions of the environment. The exposure of the timber structure often leads to its deterioration. Standard test procedures to determine typical properties of wood cannot be used as there is the requirement of the minimum interference with the structure. Several non-destructive testing (NDT) methods for the determination of timber condition have been developed and are used. However, the results of NDT can be used to predict mechanical properties of timber elements only to a limited degree. Semi-destructive testing (SDT) methods are a compromise. In the paper a functional model of a device that allows for the measurement of conventional strength and modulus of deformation of timber in compression parallel to the grain is presented. The device is inserted to a bored hole and pushes the jaws apart with a small test jack loading the bore walls. This paper presents possible use of the device for surveys of timber bridges.
Analysis of mini-jack technique for in situ measurement of strength
Kloiber, Michal ; Tippner, J. ; Kunecký, Jiří ; Sebera, V. ; Milch, J. ; Hrivnák, Jaroslav
The paper presents a recently developed diagnostic technique for in situ determination of modulus of deformability (MODL) and conventional strength (CSL) parallel to the grain using the mini-jack inserted in bored hole. The mini-jack compression technique simulates the standard compression test, it is compared to that to examine its prediction strength (correlation coefficients). The paper shows an influence of moisture content of wood on experimental measurements using this technique. The measurement was carried out at spruce samples at three moisture contents of 12, 18 and 24%. The results of the tests prove a very good correlation of the strength determined by the proposed technique and wood density and strength determined at universal testing machine in compression parallel to the grain. The effect of the moisture content on the measurement by the mini-jack technique was proved to be significant. Beside that, the newly-developed instrument was also studied using digital image correlation (DIC) technique to analyze induced strains around the bored hole. This was studied on halved spruce samples. The DIC revealed symmetric character of the loading and significant differences between strains induced in tangential and longitudinal directions.
Lapped scarf joints for reconstruction of historical structures
Kunecký, Jiří ; Fajman, P. ; Hasníková, Hana ; Kuklík, P. ; Kloiber, Michal ; Sebera, V. ; Tippner, J.
This paper presents a description of the repair of timber structures using a prosthesis scarf\njoint designed for the replacement of damaged parts of beams. This new scarf joint makes use\nof the strutting effect of inclined contact faces where the forces are transmitted through\nwooden coupling elements - wooden dowels or keys. The scarf can be modified in four\nvariants according to the relevant stress and is suitable for historically valuable timber\nstructures. It meets both functional and aesthetic requirements. The designer - structural\nengineer will learn in the methods the load bearing capacity or stiffness of the beam with the\ndesigned joint, its recommended dimensions and detailed geometry. The contractor will\nappreciate the description of the execution and maintenance of the joint.
Využití celodřevěných tesařských spojů při opravách historických konstrukcí
Kloiber, Michal ; Kunecký, Jiří ; Hasníková, Hana ; Sebera, V. ; Tippner, J. ; Fajman, P. ; Růžička, P. ; Stejskal, D.
Památkový postup popisuje způsob využití protézovacího plátového celodřevěného spoje při rekonstrukcích historických dřevěných konstrukcí. Tento nový plátový spoj využívá rozpíravého efektu šikmých čel a síly v něm jsou přenášeny pomocí dřevěných spojovacích prostředků - dřevěných kolíků či dřevěných hmoždíků. Postup se skládá z několika kapitol popisujících diagnostiku původního materiálu a opravované konstrukce, návrh spoje a jeho provádění. Obsahuje také příklady úspěšných rekonstrukcí, které byly provedeny s jeho využitím.
Plný tet: 0459383_2015_Kloiber_et_al_Vyuziti_celodrevenych_tesarskych_spoju_pri_opravach_historickych_konstrukci_PP_NAKI-004_AVV - Stáhnout plný textPDF
Plný text: content.csg - Stáhnout plný textPDF
Celodřevěné plátové spoje pro opravy historických konstrukcí
Kunecký, Jiří ; Fajman, P. ; Hasníková, Hana ; Kuklík, P. ; Kloiber, Michal ; Sebera, V. ; Tippner, J.
Publikace se věnuje popisu oprav dřevěných konstrukcí za užití protézovacího plátového spoje nově navrženého pro nahrazení poškozených částí nosníků. Tento nový plátový spoj využívá rozpíravého efektu šikmých čel a síly v něm jsou přenášeny pomocí dřevěných spojovacích prostředků - dřevěných kolíků či dřevěných hmoždíků. Plát je modifikován ve čtyřech variantách dle způsobu namáhání a je vhodný pro historicky hodnotné dřevěné konstrukce. Splňuje jak funkční, tak estetické hledisko. V metodice se projektant - statik dozví, jaká je únosnost či tuhost nosníku s navrženým spojem, jeho doporučené rozměry a detailní geometrie. Zhotovitel naopak ocení popis výroby a údržby spoje.
Plný tet: 0459382_2016_Kunecky_et_al_Celodrevene_platove_spoje_pro_opravy_historickych_konstrukci - Stáhnout plný textPDF
Plný text: content.csg - Stáhnout plný textPDF
Navrhování celodřevěných tesařských spojů pro opravy historických konstrukcí
Kunecký, Jiří ; Hasníková, Hana ; Fajman, P. ; Tippner, J.
Příspěvek představuje novou metodiku „Celodřevěné plátové spoje pro opravy historických konstrukcí“, která se zabývá návrhem nastavovacího tesařského spoje vhodného pro opravy cenných historických dřevěných konstrukcí pomocí protézování poškozených částí trámů. Metodika je výsledkem čtyřletého výzkumného projektu podpořeného Ministerstvem kultury ČR v rámci programu NAKI (Národní a kulturní identity), na jehož řešení se podílel Ústav teoretické a aplikované mechaniky AV ČR, v. v. i. ve spolupráci s Fakultou stavební ČVUT a Lesnickou a dřevařskou fakultou Mendelovy univerzity v Brně.

Národní úložiště šedé literatury : Nalezeno 15 záznamů.   1 - 10další  přejít na záznam:
Viz též: podobná jména autorů
1 Tippner, Jan
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.