Národní úložiště šedé literatury Nalezeno 8 záznamů.  Hledání trvalo 0.01 vteřin. 
Electrochemical Characterization of Self-Assembled Monolayers Containing Redox Switching Element
Nováková Lachmanová, Štěpánka ; Kocábová, Jana ; Vavrek, František ; Sebechlebská, Táňa ; Šebera, Jakub ; Kolivoška, Viliam ; Lukášek, J. ; Balzer, N. ; Valášek, M. ; Hromadová, Magdaléna
Adsorption properties of molecules containing [Ru(terpy)2]2+ and [Os(terpy)2]2+ redox switching element connected to the electrode surface by tripodal thiolate anchoring groups have been studied together with their charge transfer properties in the adsorbed form. STM-based current-voltage measurements confirmed that the conductance of self-assembled monolayer containing [Os(terpy)2]2+ redox switching element is lower than that containing [Ru(terpy)2]2+ element. This observation agrees with previously observed differences in the electron transfer rate constants of these molecules in their adsorbed state.
Electroplating of 3D Printed Electrodes for Selective Electrochemical Reduction of C02
Vaněčková, Eva ; Bouša, Milan ; Shestivska, Violetta ; Kubišta, Jiří ; Rathouský, Jiří ; Sebechlebská, Táňa ; Kolivoška, Viliam
In this work, computer assisted design and fused deposition modelling 3D printing are\nemployed to devise and manufacture electrodes from polylactic acid-carbon nanotube\nconductive composite. Electrodes are further modified by copper electroplating to prepare\ncatalysts for the electrochemical reduction of carbon dioxide. Scanning electron microscopy\nand energy dispersive X-ray analysis are used to inspect the surface morphology and chemical\ncomposition of obtained catalysts. Cyclovoltammetric investigations reveal that the copper\nelectroplating leads to the increase of electrode activity by three orders of magnitude.
Electrochemical Characterization of Molecular Conductors Containing Redox Switching Element
Nováková Lachmanová, Štěpánka ; Vavrek, František ; Sebechlebská, Táňa ; Šebera, Jakub ; Kolivoška, Viliam ; Lukášek, J. ; Balzer, N. ; Valášek, M. ; Mayor, M. ; Hromadová, Magdaléna
Electrochemical properties of new molecules containing tripodal anchor and redox switching\nelement have been studied by cyclic voltammetry and DFT quantum mechanical calculations.\nComparison of their redox properties with individual organometallic [Ru(terpy)2]2+t3+ and\n[Os(terpy)2]2+t3+ redox centers shows that covalently bonded tripodal anchor does not\ncompromise the reversibility of a redox process and has no effect on the stability of new\nmolecules. New molecular conductors have smaller HOMO-LUMO gap and both are oxidized\nat only slightly more positive potentials after tripodal substitution making them suitable for the\ndevelopment of molecular conductors with switching abilities.
Charge Transport in Single Oligophenylene Molecular Wires with Different Anchoring Groups
Hromadová, Magdaléna ; Kolivoška, Viliam ; Šebera, Jakub ; Sebechlebská, Táňa ; Gasior, Jindřich ; Nováková Lachmanová, Štěpánka ; Mészáros, G. ; Lindner, M. ; Mayor, M. ; Valášek, M.
This work compares single molecule conductance measurements of selected organic systems containing identical oligophenylene molecular wires and different tripodal anchoring groups. Single molecule conductance G was obtained by a scanning tunneling microscopy break junction technique complemented by theoretical calculations based on the density functional theory and non-equilibrium Green’s function formalism. Two molecules were compared where the same oligophenylene wire is connected to one of the electrodes via a tripod substituted on each leg by a thiol group either in the meta or para position. By combined experimental and theoretical analysis it was possible to confirm that single molecule conductance in the metal-molecule-metal junction of both molecules corresponds to a fully extended molecular wire, which is attached to one of the electrodes by all three thiolate bonds of the tripod. Experimental results confirmed that G value of meta-connected molecules is lower than that of para, whereas junction formation probability was higher for meta functionalization.
Charge Transport in Single Oligophenylene Molecular Wires with Different Anchoring Groups
Hromadová, Magdaléna ; Kolivoška, Viliam ; Šebera, Jakub ; Sebechlebská, Táňa ; Gasior, Jindřich ; Nováková Lachmanová, Štěpánka ; Mészáros, G. ; Lindner, M. ; Mayor, M. ; Valášek, M.
This work compares single molecule conductance measurements of selected organic systems containing identical oligophenylene molecular wires and different tripodal anchoring groups. Single molecule conductance G was obtained by a scanning tunneling microscopy break junction technique complemented by theoretical calculations based on the density functional theory and non-equilibrium Green’s function formalism. Two molecules were compared where the same oligophenylene wire is connected to one of the electrodes via a tripod substituted on each leg by a thiol group either in the meta or para position. By combined experimental and theoretical analysis it was possible to confirm that single molecule conductance in the metal-molecule-metal junction of both molecules corresponds to a fully extended molecular wire, which is attached to one of the electrodes by all three thiolate bonds of the tripod. Experimental results confirmed that G value of meta-connected molecules is lower than that of para, whereas junction formation probability was higher for meta functionalization.
Electrochemical Investigation of Polylactic Acid/Carbon Black Composite Filament for the Manufacture of 3D Printed Electrodes
Sebechlebská, Táňa ; Vaněčková, Eva ; Shestivska, Violetta ; Kolivoška, Viliam
Fused deposition modeling 3D printing has recently attracted increasing attention as an inexpensive, fast, reliable, adaptable and environmentally friendly tool to fabricate electrodes and electrochemical cells from composites of thermoplastics and carbon nanostructures. In this work, we use electric conductance measurements and cyclic voltammetry employing Ru(acac)30/1- as an electroactive probe to demonstrate that commercial polylactic acid(PLA)/carbon black composite filaments may be readily used as functional working electrodes in aqueous electrolytes. We further devise a procedure that leads to an improvement of their electrochemical performance. Characteristics of composite filaments treated by the optimized procedure approach those of classical metallic electrodes.
Charge Transport in Single Oligophenylene Molecular Wires with Different Anchoring Groups
Hromadová, Magdaléna ; Kolivoška, Viliam ; Šebera, Jakub ; Sebechlebská, Táňa ; Gasior, Jindřich ; Nováková Lachmanová, Štěpánka ; Mészáros, G. ; Lindner, M. ; Mayor, M. ; Valášek, M.
This work compares single molecule conductance measurements of selected organic systems containing identical oligophenylene molecular wires and different tripodal anchoring groups. Single molecule conductance G was obtained by a scanning tunneling microscopy break junction technique complemented by theoretical calculations based on the density functional theory and non-equilibrium Green’s function formalism. Two molecules were compared where the same oligophenylene wire is connected to one of the electrodes via a tripod substituted on each leg by a thiol group either in the meta or para position. By combined experimental and theoretical analysis it was possible to confirm that single molecule conductance in the metal-molecule-metal junction of both molecules corresponds to a fully extended molecular wire, which is attached to one of the electrodes by all three thiolate bonds of the tripod. Experimental results confirmed that G value of meta-connected molecules is lower than that of para, whereas junction formation probability was higher for meta functionalization.
Investigation of Single Molecule Charge Transport Properties and Geometrical Arrangement in Terpyridine Architectures Supported by the Tetraphenylmethane Tripod
Kolivoška, Viliam ; Sebechlebská, Táňa ; Šebera, Jakub ; Gasior, Jindřich ; Lindner, M. ; Lukášek, J. ; Valášek, M. ; Mayor, M. ; Mészáros, G. ; Hromadová, Magdaléna
Tripodal platforms were engineered recently to realize a well-defined directional contact between metallic electrodes and molecular architectures dedicated to serve as working elements for electronic applications. In this work we employ cyclic voltammetry, scanning tunneling microscopy break junction technique and theoretical approaches based on the combination of density functional theory and non-equilibrium Green´s function to investigate the geometrical arrangement and single molecule charge transport in terpyridine-based architectures supported by tetraphenylmethane tripod. We demonstrate that this architecture adopts a favorable geometrical arrangement capable of forming highly conductive molecular junctions and is thus suitable to serve as a basis for working molecular switches.

Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.