Národní úložiště šedé literatury Nalezeno 7 záznamů.  Hledání trvalo 0.00 vteřin. 
Statická a dynamická analýza zavěšené lávky
Dvořák, Kamil ; Lang, Rostislav (oponent) ; Martinásek, Josef (vedoucí práce)
Lávka, Metoda konečných prvků, Statika, Dynamika, Předpětí, Soudržná předpínací výztuž, Nesoudržná předpínací výztuž
Static and dynamic footbridge analysis
Jankovičová, Soňa ; Lang, Rostislav (oponent) ; Martinásek, Josef (vedoucí práce)
The subject of this diploma thesis is static and dynamic analysis of the load-bearing steel structure of footbridge with reinforced concrete bridge deck, standing over the Morava river. Bridge was designed as a solid ribbed arch, so it consists of a pair truss beams, strengthen by two steel arches with suspenders. There were created two different models, one in program SCIA Engineer, where the individual elements were designed as spatial bars. In the second model, they were created as surface elements. For such model, it was more appropriate to use ANSYS Mechanical APDL program. The load and selected combinations are calculated manually according to valid national standardization documents. Furthermore, this thesis contains manual calculations of stress. The results are compared with computing programs to determine the correct functioning of the models. In the next part, the work is devoted to static and dynamic analysis, where it compares the results of the mentioned two model situations.
Statická analýza hliníkové konstrukce s membránou
Švejcar, Martin ; Lang, Rostislav (oponent) ; Vlk, Zbyněk (vedoucí práce)
Tato bakalářská práce se zabývá statickou analýzou hliníkové konstrukce s membránou. V programu SCIA Engineer bylo vytvořeno několik modelů jednoho hlavního rámu, které byly následně mezi sebou porovnány. Výpočty byly provedeny v programu pomocí metody konečných prvků a vybrané zatěžovací stavy a modely pak byly ověřeny ručními výpočty.
Analysis of concrete structure with respecting of construction in stages and material rheology
Mareková, Adela ; Lang, Rostislav (oponent) ; Vlk, Zbyněk (vedoucí práce)
This diploma thesis deals with a static analysis of a highway bridge structure with respecting of construction stages. Computational models of the bridge were created using RFEM 6 software. Gradual prestressing of the structure was applied in the models. Construction stages analysis is also applied to the bridge models in combination with modal and stability analysis. This thesis also deals with time – dependent analysis, therefore influence of rheological properties of material.
Analýza membránových konstrukcí s respektováním výstavby ve fázích
Zajac, Zbyněk ; Kytýr, Jiří (oponent) ; Lang, Rostislav (vedoucí práce)
Tato diplomová práce se zabývá návrhem a výpočtem membránové konstrukce. Na membránovém zastřešení kónického tvaru byl demonstrován postup návrhu lehké a vzdušné konstrukce v programu RFEM. Konstrukce byla poté zatížena ve virtuálním větrném tunelu programu RWIND. Výsledky byly srovnány s hodnotami uvedenými v odborné literatuře. Vznikl tak ucelený návod doplněný o obecně platné poznatky, který lze využít při návrhu podobných konstrukcí. Následně byl s využitím již zmíněných poznatků demonstrován vliv konstrukčních fází na výsledný stav vnitřních sil. Právě membránové konstrukce jsou velmi citlivé na postup výstavby, jelikož není možné předepnout všechna membránová pole najednou. Byl využit program od společnosti DLUBAL software s.r.o., který umožňuje provést form-finding v jednotlivých fázích výstavby.
Algorithms for design and analysis of membrane structures
Lang, Rostislav ; Krejsa,, Martin (oponent) ; Kytýr, Jiří (oponent) ; Němec, Ivan (vedoucí práce)
The present thesis deals with membrane structures, focusing on the description of both the inherent physical necessitates which has to be dealt and the algorithms used when developing the FEM software. After introducing physical basis of the individual design and analysis steps, the specific issues associated with these calculation procedures as well as the particular solution processes are described. The first chapter deals with the form finding analysis, which is inherently associated with designing tensile structures. The equilibrium shape is derived from the requirement for the resulting prestress, given boundary conditions and applied external load. However, this process is also generally dealing with a complex task of searching for the equilibrium itself. Therefore, necessary stabilization techniques are an inherent part of the calculation procedures. The selected methods as well as the proposed technique specialized for the calculation of conical membranes are presented. In addition to the given thesis scope, the proposal of an algorithm for dealing with optimizing the shapes of arches and shells is described. In the chapter about the structural analysis, the main focus is given to the phenomenon of membranes wrinkling. This sudden loss of stability, when the compression occurs, strongly affects the structural response. The proposed algorithm is presented, which is modularly applicable to both the elastic and inelastic materials as described in detail. The chapter dealing with the cutting pattern generation process presents the proposal of the selected combination of two existing solution methods. This algorithms sequence focuses on reaching the optimum combination of the calculation speed, generality and precision. The individual chapters are complemented by presenting of the examples analyzed by using the described algorithms, which demonstrate the individual physical or implementation issues and the associated solution procedures.
Návrh a výpočet membránové konstrukce zastřešení stadionu
Lang, Rostislav ; Kytýr,, Jií (oponent) ; Němec, Ivan (vedoucí práce)
Tato práce se zabývá problematikou návrhu a výpočtu membránové konstrukce zastřešení stadionu. Jedná se o komplexní inženýrský problém, který v sobě zahrnuje mnoho dílčích složek: hledání počátečního tvaru membrány, staticky i architektonicky vhodné uspořádání systému nosných lan, hospodárné řešení okrajových podmínek (uložení) konstrukce. Všechny složky návrhu se ovlivňují a nelze je řešit bez vzájemné koordinace. Vždy velice záleží na zkušenostech a citu inženýra, jenž takovouto konstrukci navrhuje. Úlohu již není možné řešit dle teorie I.řádu. Rovnováha sil na nedeformované konstrukci, jenž u mnoha projektovaných konstrukcí dává uspokojivé výsledky, by neodpovídala realitě. Je proto nutné uvažovat rovnováhu sil na deformované konstrukci dle teorie velkých deformací. Práce byla zadána s ohledem na záměr firem Ing. Software Dlubal s.r.o. a FEM consulting s.r.o., které spolupracují na vývoji software RFEM, doplnit tento programový systém o modul MEMBRÁNA pro hledání výchozích tvarů membránových konstrukcí. Tato práce má být příspěvkem k vytvoření tohoto modulu.

Viz též: podobná jména autorů
2 LANG, Rudolf
3 Lang, Radek
2 Lang, Richard
5 Lang, Roman
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.