|
|
Možnosti využití 4D výpočetní tomografie v lomových testech
Kumpová, Ivana ; Fíla, Tomáš ; Koudelka, Petr ; Rozsypalová, I. ; Keršner, Z. ; Kytýř, Daniel ; Vopálenský, Michal ; Vavřík, Daniel ; Vyhlídal, M. ; Drdácký, Miloš
Příspěvek prezentuje studium vnitřní struktury a lomových vlastností vybraných kvazikřehkých stavebních materiálů vystavených teplotním změnám a možnosti uplatnění metody kombinující ohybové lomové testy a časově závislou výpočetní tomografii (4D CT). Zkušební tělesa byla podrobena účinkům vysokých teplot a následně testována čtyřbodovým ohybem během 4D CT. Byly tak získány 3D obrazové informace v různých fázích zatížení a porušování materiálu. Rovněž bylo provedeno komparativní měření pevnosti v tlaku. Tyto výsledky jsou v dobré shodě.
|
|
|
In-situ compression test of artificial bone foams in controlled environment using X-Ray micro-computed tomography
Glinz, J. ; Kytýř, Daniel ; Fíla, Tomáš ; Šleichrt, Jan ; Schrempf, A. ; Fürst, D. ; Kastner, J. ; Senck, S.
In this study, we investigated specimens of artificial bone foams, developed by the research group for surgical simulators at the UAS Linz, which are used to mimic the haptic feedback of physiologic and pathologic bone for more realistic surgery training. Specimens with two kinds of mineral filler material as well as different amounts of foaming agent were tested in an environmental in-situ loading stage developed by the ITAM CAS and scanned via X-ray micro-computed tomography. In this in-situ stage, specimens can be immersed in liquid and tested under temperature-controlled conditions. Consequently, a total amount of 12 specimens was subjected to compression loading, half of them immersed in water at 36.5 °C and half in dry condition. Results showed that there is no significant influence of liquid immersion to the compression outcome. However, foams with less amount of foaming agent appeared to have smaller pores resulting in higher compression strength.
|
|
|
Deformation response of polydimethylsiloxane substrates subjected to uniaxial quasi-static loading
Vinařský, V. ; Martino, F. ; Forte, G. ; Šleichrt, Jan ; Rada, Václav ; Kytýř, Daniel
To investigate cellular response of cardiomyocytes to substrate mechanics, biocompatible material with stiffness in physiological range is needed. PDMS based material is used for construction of microfluidic organ on chip devices for cell culture due to ease of device preparation, bonding, and possibility of surface functionalization. However it has stiffness orders of magnitude out of physiological range. Therefore, we adapted recently available protocol aiming to prepare substrates which offer stiffness in physiological range 5−100 kPa using various mixtures of Sylgard. An in-house developer loading device with single micron position tracking accuracy and sub-micron position sensitivity was adapted for this experimental campaign. All batches of the samples were subjected to uniaxial loading. During quasi-static experiment the samples were compressed to minimally 40% deformation. The results are represented in the form of stress-strain curves calculated from the acquired force and displacement data and elastic moduli are estimated.
|
|
|
Acta Polytechnica CTU Proceedings
Kytýř, Daniel ; Major, Z. ; Doktor, Tomáš
The 16th symposium continues both the long tradition of this conference series and introduces novel elements. The YSESM 2018 symposium provides a forum for young researchers and engineers, students and PhD students dealing with subjects of experimental mechanics. In addition, the combination of the experimental mechanics with modern numerical methods will be a new focus of this 16th Symposium.
|
|
|
Multi-channel control system for in-situ laboratory loading devices
Rada, Václav ; Fíla, Tomáš ; Zlámal, Petr ; Kytýř, Daniel ; Koudelka_ml., P.
In recent years, open-source applications have replaced proprietary software in many fields. Especially open-source software tools based on Linux operating system have wide range of utilization. In terms of CNC solutions, an open-source system LinuxCNC can be used. However, the LinuxCNC control software and the graphical user interface (GUI) could be developed only on top of Hardware Abstraction Layer. Nevertheless, the LinuxCNC community provided Python Interface, which allows for controlling CNC machine using Python programming language, therefore whole control software can be developed in Python. The paper focuses on a development of a multi-process control software mainly for in-house developed loading devices operated at our institute. The software tool is based on the LinuxCNC Python Interface and Qt framework, which gives the software an ability to be modular and effectively adapted for various devices.
|
|
|
Instrumentation of four-point bending test during 4D computed tomography
Kytýř, Daniel ; Fíla, Tomáš ; Koudelka_ml., Petr ; Kumpová, Ivana ; Vopálenský, Michal ; Vavro, Leona ; Vavro, Martin
High-resolution time-lapse micro-focus X-ray computed tomography is an effective method for investigation of deformation processes on volumetric basis including fracture propagation characteristics of non-homogeneous materials subjected to mechanical loading. This experimental method requires implementation of specifically designed loading devices to X-ray imaging setups. In case of bending tests, our background research showed that no commercial solution allowing for reliable investigation of so called fracture process zone in quasi-brittle materials is currently available. Thus, this paper is focused on description of recently developed in-situ four-point bending loading device and its instrumentation for testing of quasi-brittle materials. Proof of concept together with the pilot experiments were successfully performed in a CT scanner TORATOM. Based on results of the pilot experiments, we demonstrate that crack development and propagation in a quasi-brittle material can be successfully observed in 3D using high resolution 4D micro-CT under loading.
|
|
| |
|
|
Basic biomechanical characterization of polyurethane based artificial cancellous structures
Šleichrt, Jan ; Kytýř, Daniel ; Pithartová, Kateřina ; Senck, S. ; Fürst, D. ; Schrempf, A.
The main goal of this study is to validate elementary mechanical parameters of a newly designed open-cell foam. The purpouse for investigating artificial material is to approach the properties of the human bone in the case of its adequate replacement. Investigated material can be also used as an artificial bone to train surgical procedures and to improve the skills of the surgeons. Four sets of the foam with different chemical composition were subjected to an uniaxial quasi-static loading to describe basic mechanical behaviour of these samples. Based on these experiments, the stress-strain diagrams were created as a comparative tool including calculation of the effective Young’s modulus. The acquired knowledges will be used as input parameters of a follow-up study aimed at describing the morphology of presented structures and their response to mechanical experiments. A distortion effect of porosity on the results is not considered in this study.
|
|
|
Utilization of image and signal processing techniques for assessment of built heritage condition
Koudelka_ml., Petr ; Koudelková, Veronika ; Doktor, Tomáš ; Kumpová, Ivana ; Kytýř, Daniel ; Valach, Jaroslav
Historical buildings represent invaluable heritage from the past and therefore their protection is a very important task. Assessment of their condition must not cause damage accumulation thus the least possible volume removed from the structure is essential. As many historical buildings in the Czech Republic are built using sandstone that can be considered as a typical heterogeneous system, statistical signal processing is a promising approach for determination of the representative volume element (RVE) dimensions. Such calculations can be carried out on the domain of logical arrays representing binary images of the materials microstructure. This paper deals with processing of image data obtained using SEM-BSE and high resolution flatbed scanner for determination of RVE dimensions. Advanced image processing techniques are employed and results from calculation using grayscale data are presented and compared with results calculated on the basis of color input images.
|
|
|
Acta Polytechnica CTU Proceedings 7
Kytýř, Daniel ; Zlámal, Petr
The International Symposium on Experimental Methods and Numerical Simulation in Engineering Sciences continues the tradition of the Czech-German bilateral symposium founded by prof. Karl-Hans Laermann and prof. Stanislav Holý in 1985. In the following years, the symposium was extensively developed by prof. Josef Jíra. The symposium shall bring together mainly young scientists who are actively involved in experimental solid mechanics, theoretically and practically, in order to exchange experience, to report on the present state-of-art as well as on running research projects, to discuss due questions and problems and to promote the co-operation between individuals as well as between institutions. Therefore in the symposium discussions will play a highly significant role.
|
host ::
RSS.