Národní úložiště šedé literatury Nalezeno 33 záznamů.  1 - 10dalšíkonec  přejít na záznam: Hledání trvalo 0.01 vteřin. 
SMV-2022-56: Měření tepelného toku hřídelí expanzní turbíny typu HEXT 300
Srnka, Aleš ; Hanzelka, Pavel ; Krutil, Vojtěch
V kryogenní měřící aparatuře, nově vyvinuté v ÚPT AVČR Brno, v. v. i., byly za různých okrajových teplot měřeny tepelné toky mezi teplejší a studenější částí hřídele kryogenního stroje. Experimentální výsledky byly porovnány s teoretickým výpočtem toků. Po provedených experimentech byla zadavateli předána výzkumná zpráva. Výzkum je prováděn na základě Smlouvy o dílo mezi PBS a.s. Velká Bíteš a ÚPT AVČR Brno, v. v. i., ze dne 17. 9. 2018 a podle objednávky č. 21431667 ze dne 9. 8. 2021.
SMV-2020-39: Výzkum tepelné vodivosti vzorků z různých materiálů v teplotním rozsahu 10-80K
Srnka, Aleš ; Hanzelka, Pavel
V kryogenní aparatuře, vyvinuté v ÚPT AVČR Brno, v.v.i. byly za různých okrajových teplotních podmínek zkoumány tepelné vodivosti vzorků materiálů, zvláště kovových, které mohou být využity v kryogenních strojích. Po provedených experimentech na několika vzorcích byl zadavateli předán měřící protokol. Výzkum je prováděn na základě Smlouvy o dílo mezi PBS a.s. Velká Bíteš a ÚPT AV ČR Brno, v.v.i. ze dne 17.9.2018 a podle objednávek č. 20430937 ze dne 21.5.2020 a č. 20431123 ze dne 19.6.2020. \n
SMV-2018-22: Optimalizace recyklace hélia v Národním NMR centru J. Dadoka
Srnka, Aleš ; Hanzelka, Pavel ; Krejčí, Pavel ; Heinige, Vladimír
Experimentální výzkum pokrýval všechny aspekty zabezpečení optimální a efektivní recyklace hélia. Zejména byl optimalizován postup doplňování kapalného média do jednotlivých přístrojů a byly identifikovány a odstraněny nežádoucí ztráty na jednotlivých částech technologického řetězce včetně transportních Dewarových nádob.
Effect of thermal radiation on low temperature measurement for various types of temperature sensor installations
Urban, Pavel ; Hanzelka, Pavel ; Králík, Tomáš ; Vlček, Ivan ; Srnka, Aleš
We investigated an effect of thermal radiation (300 K) on precision of low temperature measurement of a sample holder (or sample) in an UHV SEM/SPM microscope working at range down to 20 K for various ways of temperature sensor mounting. We designed a special copper casing for installation of Lake Shore\ntemperature sensors (CernoxTM and Si diodes) encapsulated in SD packages. The sensor body is attached direct to the casing using indium solder. The current leads pertaining to the sensor are thermally anchored but electrically insulated from the casing. Quality of sensors installation in the casing was tested for various ways of mounting on a cooled plate. Insufficient thermal anchoring of electrical wires and thermal shielding were imitated. Comparative measurement was also performed with sensors in SD package mounted without\ncasing. The experiments proved that our special design of temperature sensors casing is adequate for intended application of temperature measurement of sample holder in UHV SEM/SPM microscope. In contrary, measurement precision of unprotected sensors was absolutely unsuitable.
SMV-2015-23: Vývoj nízkoteplotního systému pro spektroskopii
Urban, Pavel ; Hanzelka, Pavel
Byl navržen systém pro měření časových průběhů teplot pevných i kapalných vzorků ve spektroskopické kyvetě pro rozsah pracovních teplot 77 K až 300 K. Pro uvedený systém, který využívá dva typy dusíkových kryostatů, byla navržena a diagnostikována vakuová čerpací trasa. Součástí řešení je i návrh na umístění požadovaných teplotních snímačů a elektrického odporového topení v místě vzorku a dále elektrického odporového topení pro ohřev/odplynění vakuové čerpací trasy.
SMV-2013-27: Absorptivita tepelného záření pro vývoj materiálů superizolací pro střídavá elektromagnetická pole
Králík, Tomáš ; Hanzelka, Pavel
Superizolace složené z mnoha vrstev pokovených plastových fólií jsou důležitou součástí opatření pro snížení toku tepla do nízkoteplotní (10 K až 300 K) částí přístroje. Kovová vrstva byla upravena tak, aby bylo omezeno vytváření tepla nebo rušení vířivými proudy od střídavých elektromagnetických polí (např. supravodivé el. motory, generátory, transformátory). Tyto úpravy však vždy zhoršují tepelné radiační vlastnosti těchto materiálů a bylo nutné posoudit vliv těchto úprav. Byla experimentálně ověřena absorptivita tepelného záření kovových vrstev upravených dělením na segmenty dvěma technologiemi a vrstvy z kovových mikročástic v pojivu na plastových fóliích.
Design and Testing of Low Temperature Part of an UHV – SPM Microscope
Frolec, Jiří ; Vonka, J. ; Hanzelka, Pavel ; Králík, Tomáš ; Musilová, Věra ; Urban, Pavel
We have developed low temperature part of an ultra high vacuum scanning probe microscope (UHV-SPM) working at variable temperature within the range from 20 K to 700 K. To achieve the required temperature range, a flow cooling system using cryogenic helium (approximately 5 K) as a coolant was designed. The system consists of a flow cryostat and a flexible low-loss transfer line connecting a Dewar vessel with the flow cryostat. We have also tested liquid nitrogen (approximately 77 K) as an alternative low-cost coolant. Using nitrogen, the microscope can operate at temperatures of about 100 K and higher. As the flow of the coolant through the cryostat can cause thermally induced two-phase flow fluctuations resulting in instability in temperatures, preliminary tests were done in order to find ways of avoiding the temperature oscillations and optimising the cooling process.
Factors Influencing Thermal Radiative Properties of Metals
Králík, Tomáš ; Hanzelka, Pavel ; Musilová, Věra ; Srnka, Aleš
Data on thermal absorptivity and emissivity are important for calculations of heat flows in cryogenic devices. Although thermal radiative properties of materials used in cryogenics are measured, published and used for more than sixty years we have noticed that sometimes users of that data don’t well understand the significance of individual factors influencing thermal radiative properties. The sensitivity of the thermal radiative properties of metals to the condition of the surface and the difficulty of measurement, especially at low temperatures is probably the reason of dispersion of the published values. The effect of the material and its purity, finishing (machining, mechanical or chemical polishing) and of the protective coatings or accidental layers (water, oxidation) on the thermal radiative properties is not always obvious. Influence of the material, surface treatment, roughness and layers on the surface is discussed on the basis of our 20 year experience with measurement of the emissivity and absorptivity in the range from 20 K to 300 K.
Temperature Inversion and Heat Transport Against the Temperature Drop in Two-Phase Convection of Cryogenic Helium
Urban, Pavel ; Schmoranzer, D. ; Hanzelka, Pavel ; Skrbek, L.
In the system of two bodies A and B connected by a two-phase vapour-liquid system consisting only of cryogenic helium, we observed anomalous heat transport from the colder but heated body B to the warmer but cooled body A. We noticed this effect during the process of liquid evaporation inside a cylindrical pressure convection cell used for study of Rayleigh-Bénard convection. This anomalous heat transfer occurs under non-equilibrium conditions, owing to the phase transitions that take place inside the cell while temperature inversion develops between the heated but cooler bottom plate and the cooled but warmer top plate. This process is, by virtue of the system being open with respect to heat transport, in no contradiction to the second law of thermodynamics, and a numerical model was formulated that describes the observations with good agreement.
Cryogenic He experiment on Natural Turbulent Convection
Králík, Tomáš ; Urban, Pavel ; Musilová, Věra ; Hanzelka, Pavel ; Srnka, Aleš ; Repisky, Andrej
Cryogenic helium gas is a suitable fluid for study of natural turbulent convection at very high Rayleigh numbers. We present experimental method and new result on Reynolds and Péclet numbers characterizing large scale circulation (LSC) of fluid at Rayleigh numbers within the range from 1011 to 1015. Observation of LSC is based on measurement of local temperature fluctuations of convecting helium. For experiments we used a specially designed cylindrical cell of height L = 0.3 m and diameter D = 0.3 m with minimized parasitic effects on studied convection, previously published on CryoPrague 2006 [1].

Národní úložiště šedé literatury : Nalezeno 33 záznamů.   1 - 10dalšíkonec  přejít na záznam:
Viz též: podobná jména autorů
1 Hanzelka, Petr
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.