|
|
Effect of implantation of C, Si and Cu into ZrNb nanometric multilayers
Daghbouj, N. ; Karlík, M. ; Lorinčík, J. ; Polcar, T. ; Callisti, M. ; Havránek, Vladimír
Sputter-deposited Zr/Nb nanometric multilayer films with a periodicity (L) in the range from 6 to 167 nm were subjected to carbon, silicon and copper ion irradiation with low and high fluences at room temperature. The ion profiles, mechanical proprieties, and disordering behavior have been investigated by using a variety of experimental techniques (Secondary Ion Mass Spectrometry - SIMS, nanoindentation, X-ray diffraction - XRD, and scanning transmission electron microscopy - STEM). On the STEM bright field micrographs there is damage clearly visible on the surface side of the multilayer. Deeper, the most damaged and disordered zone, located close to the maximum ion concentration, was observed. The in-depth C and Si concentration profiles obtained from SIMS were not affected by the periodicity of the nanolayers. This is in accordance with SRIM simulations. XRD and electron diffraction analyses suggest a structural evolution in relation to L. After irradiation, Zr (0002) and Nb (110) reflexions overlap for L=6 nm. For the periodicity L > 6 nm the Zr (0002) peak is shifted to higher angles and Nb (110) peak is shifted to lower angles.
|
|
| |
|
| |
|
|
Neutron investigation of Nitinol stents and massive samples before and after PIRAC coating
Rogante, M. ; Buhagiar, J. ; Cassar, G. ; Debono, M. ; Lebedev, V. ; Mikula, Pavol ; Ryukhtin, Vasil
Nitinol, a thermoelastic Ni-Ti Shape Memory Alloy (SMA) with approximately 50 at. % Ti, is adopted in a wide range of medical equipment and devices used in interventional radiology, orthopaedics, neurology and cardiology, in particular as a smart material for stents. In this work, NiTi real stents and massive samples before and after different Powder Immersion Reaction Assisted Coating (PIRAC) treatments have been investigated by using two neutron techniques: (1) Small and Ultra-Small Angle Neutron Scattering (SANS, USANS) for nano- and micro-scale characterization, obtaining information on structure and the effects due to the coating treatment, and (2) High-Resolution Neutron Diffraction (HRND), evaluating the macrostrain components resulting from angular shifts of diffraction peaks and the micro-strains in the plastically deformation region by means of profile-broadening analysis. The obtained results contribute: improving knowledge of defects and other key features of the materials complementary to those achieved by using traditional examination techniques. helping to better understand the functional characteristics of Nitinol parts and predict the material's mechanical behaviour.
|
|
|
Residual stresses of laser-welded pressure vessel steel determined by X-ray and neutron diffraction
Trojan, K. ; Vlk, A. ; Čapek, J. ; Hervoches, Charles ; Ganev, N.
To gain insight into the quality of the laser weld, information about the residual stress state across the weld is very useful. In this contribution, the residual stress profiles for lowalloy carbon steel plates of P355NL1 grade, which were laser welded from both sides, are presented. To separate the effects of the production of plates from the welding process, the samples were annealed for stress relieving. Using X-ray and neutron diffraction, the surface and bulk RS profiles were obtained. From the obtained data, first, the difference in the character of the longitudinal (parallel to the weld axis) and the transversal component of the RS tensor can be seen. The longitudinal component has a tensile character with a maximum value approximately 500 MPa. Values and character of the transversal component vary strongly with depth and distance from the weld axis.
|
|
|
On a possible use of neutron three axis diffractometer for studies of elastic and plastic deformation of polycrystalline materials
Mikula, Pavol ; Ryukhtin, Vasil ; Rogante, M.
Feasibility of using a high-resolution three axis neutron diffractometer performance for elastic and plastic deformation studies of metallic polycrystalline samples is presented. The method consists of unconventional set up employing bent perfect crystal (BPC) monochromator and analyzer with a polycrystalline sample in between. After the realization of focusing conditions in real and momentum space at the neutron wavelength of 0.162 nm, a high angular resolution up to FWHM(d/d)=2x10-3 was achieved on the standard Fe(110) sample (2 mm diameter) which then opened the possibility for the measurements of small lattice parameter changes of samples. The feasibility of the instrument for macro-and microstrain as well as grain size studies is demonstrated on the polycrystalline samples of low carbon shear deformed steel wires and the NiTi plates subjected to heat treatment.
|
|
|
Production and characterization of micro-size pores for ion track etching applications
Cannavó, Antonino ; Havránek, Vladimír ; Lavrentiev, Vasyl ; Torrisi, L. ; Cutroneo, Mariapompea ; Ceccio, Giovanni ; Torrisi, Alfio ; Horák, Pavel ; Vacík, Jiří
For many years the applications of ion track etch materials have increased considerably, like charged particles detection, molecular identification with nanopores, ion track filters, magnetic studies with nanowires and so on. Over the materials generally used as track detector, the Poly-Allyl-Diglycol Carbonate (PADC), offers many advantages, like its nearly 100 % detection efficiency for charged particle, a high resistance to harsh environment, the lowest detection threshold, a high abrasion resistance and a low production costs. All of these properties have made it particularly attractive material, even if due to its brittleness, obtaining a thin film (less than 500 μm) is still a challenge. In this work, PADC foils have been exposed to a-particles emitted by a thin radioactive source of 241Am and to C ions from the Tandetron 4130 MC accelerator. The latent tracks generated in the polymer have been developed using a standard etching procedure in 6.25 NaOH solution. The dependence of the ion tracks' geometry on the ion beam energy and fluence has been evaluated combining the information obtained through a semiautomatic computer script that selects the etched ion tracks according to their diameter and mean grey value and nanometric resolution images by atomic force microscopy.
|
|
|
Ultra-low intensity proton beams for radiation response related experiments at the U-120M cyclotron
Matlocha, Tomáš ; Křížek, Filip
The U-120M cyclotron at the Nuclear Physics Institute (NPI) of the Czech Academy of Sciences in Rez is used for radiation hardness tests of electronics for high-energy physics experiments. These tests are usually carried out with proton fluxes of the order of 105–109 proton cm-2 s -1. Some tests done for the upgrade of the Inner Tracking System of the ALICE experiment at CERN, however, required proton beam intensities several orders of magnitude lower. This paper presents a method which has been developed to achieve the proton beam flux of the order of 1 proton cm-2 s -1. The method is mainly based on reduction of the discharge current in the cyclotron internal Penning type ion source. Influence of this new operation mode on the lifetime of ion source cathodes is discussed.
|
|
|
Stanovení prvkového složení drog neutronovou aktivační analýzou pro zjišťování jejich původu - studie proveditelnosti
Kučera, Jan ; Kameník, Jan ; Sabol, J. ; Šesták, B. ; Kolář, P. ; Roman, M.
Analyzovali jsme pět vzorků heroinu a pět vzorků kokainu zachycených na území České republiky metodou instrumentální neutronové aktivační analýzy (INAA). Alespoň v jednom z analyzovaných vzorků heroinu jsme stanovili 16 stopových prvků, ve vzorcích kokainu se jednalo o 9 stopových prvků. Pozoruhodné rozdíly až v rozmezí několika řádů, jsme zjistili v obsazích prvků Na, Cl, Cr, Zn a Br, zejména ve vzorcích heroinu. Přesnost výsledků INAA jsme prokázali simultánní analýzou certifikovaného referenčního materiálu NIST SRM 1547 Peach Leaves. Výsledky stanovení stopových prvků v heroinu jsme porovnali s výsledky zahraničních autorů. Dosažené výsledky ukazují na vysoký potenciál metody INAA pro prvkovou charakterizaci drog za účelem zjištění jejich původu, způsobu výroby a čištění či způsobu ředění pro konečné uživatele. Pokládáme za účelné pokračovat v analýzách většího množství vzorků s konečným cílem vytvoření databáze prvkového složení vzorků zkonfiskovaných na území ČR, která by později mohla být rozšířena ve spolupráci se zahraničními protidrogovými a policejními orgány v mezinárodním měřítku.
|
|
|
Preparation of ppHMDSO Thin Films in Capacitively Coupled RF Glow Discharges under Dusty Plasma Conditions
Homola, V. ; Buršíková, V. ; Kelar, L. ; Kelarová, Š. ; Stupavska, M. ; Peřina, Vratislav
The deposition of organosilicone thin films from mixture of hexamethyldisiloxane (HMDSO) and oxygen by using capacitively coupled R.F. glow discharges under dusty plasma conditions was investigated. High resolution topography and mechanical property maps of the prepared films were acquired by using atomic force microscopy techniques. The chemical bond and composition of the deposited films were analyzed by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The mechanical properties of the films were studied using quasistatic as well as dynamic nanoindentation tests and their surface free energies were evaluated by means of contact angle measuring technique using several testing liquids exhibiting various surface tensions. The thermal stability of the films was studied using thermal desorption spectroscopy. Neural network modelling was used to study the effect of plasma parameters on the hardness of ppHMDSO films
|
host ::
RSS.