Národní úložiště šedé literatury Nalezeno 11 záznamů.  1 - 10další  přejít na záznam: Hledání trvalo 0.00 vteřin. 
Computational and experimental assessment of natural frequencies in a bladed disk system
Mekhalfia, Mohammed Lamine ; Procházka, Pavel ; Maturkanič, Dušan ; Voronova, Evgeniya ; Hodboď, Robert
This paper examines the modal characteristics of a bladed disk in rotating machinery systems using a combination of analytical and experimental modal analysis methods. The analysis involves measuring natural frequencies and mode shapes under different operational conditions. A comparative analysis is conducted to assess modal properties obtained from both analytical and experimental approaches, while also considering the influence of rotation speed. Additionally, Finite Element Method (FEM) outputs are used to accurately position the strain gauge. Integrating these techniques provides a comprehensive understanding of the bladed disk's behaviour under varying rotational speeds, enhancing result accuracy and facilitating thorough investigation within rotating machinery systems.
Modification of cooling system for laboratory measurement of rotor blade vibration
Maturkanič, Dušan ; Procházka, Pavel ; Hodboď, Robert ; Voronova, Evgeniya ; Mekhalfia, Mohammed Lamine
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and the expected higher operating load planned for the new wheel, the cooling system was modified at the same time. The paper describes the main effort in this direction and the results that clarify the previous damage of the measuring device.
Verification of the dynamic properties of a new model turbine wheel with free blades
Voronova, Evgeniya ; Procházka, Pavel ; Maturkanič, Dušan ; Mekhalfia, Mohammed Lamine ; Hodboď, Robert
The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under various conditions. The measurements were performed in the Laboratory of Rotational Laser Vibrometry originated at the Institute of Thermomechanics AS CR, v.v.i.
Applications of blade vibration measurements in the laboratory of rotational laser vibrometry
Maturkanič, Dušan ; Procházka, Pavel ; Hodboď, Robert ; Mekhalfia, Mohammed Lamine ; Voronova, Evgeniya
The Laboratory of Rotational Laser Vibrometry was established at the Institute of Thermomechanics AS CR, v.v.i. in 2015 and the first experiments were started the following year. The measurements are intended for the research of vibration of rotating blades. The paper includes a summary of measurement results using a special turbine model and their consequences in theoretical research, as well as measurements with a real compressor of aircraft engine and comparison with computational analysis. The paper also describes the complex system for measurement and analysis.
Dependence of signal strangth on the radial distance and different types of magnets
Procházka, Pavel ; Voronova, Evgeniya ; Maturkanič, Dušan
The paper describes dependence of signal strength on the radial distance between the sensor and the measured object and dependence of signal strength on the different types of magnets. The measurements were performed in the laboratory of the rotational laser vibrometry originated at the Institute of Thermomechanics AS CR, v.v.i.
Teoretický popis měřených signálů pro vyhodnocení kmitání lopatek turbíny metodou BTT a stanovení jejich nepřesnosti
Maturkanič, Dušan ; Procházka, Pavel ; Košina, Jan ; Voronova, Evgeniya ; Hodboď, Robert
Zpráva popisuje výsledky měření kolísajících otáček lopatkového kola turbíny pro vyhodnocování kmitání lopatek metodou Blade Tip-Timing a stanovení funkce jejich změny. Komplikace, které se vyskytovaly při zpracování naměřených hodnot, vedly k detailnějšímu rozboru zaznamenaných dat, pro něž je proveden teoretický popis charakteristik získaných signálů. Měření byla prováděna pro čtveřici režimů a při dvou odlišných podmínkách měření. V návaznosti na předchozí práci je součástí zprávy rovněž vyhodnocení kontrolních měření po provedených softwarových úpravách měřicího systému.
Excitation of wheel blades by axial electromagnet at different regimes
Voronova, Evgeniya ; Maturkanič, Dušan
The paper describes the natural frequency identification experiment and results of measuring of blade vibration characteristics excitate by one axial electromagnet at different regimes. The measurements were performed in the laboratory of the rotational laser vibrometry originated at the Institute of Thermomechanics AS CR, v.v.i.
Analýza principu buzení kola turbíny magnety při různých režimech
Voronova, Evgeniya ; Maturkanič, Dušan ; Procházka, Pavel ; Hodboď, Robert
Ve zprávě je provedena analýza principu buzení vynuceného kmitání kola pomocí magnetů zapnutých v režimech: harmonickém, pulsním, pulsně-synchronním na IRC (encoder) a pulsně-synchronním na IRC (encoder) a tenzometr. Dále se ověřoval vliv šířky pulsu a frekvence buzení axiálního magnetu na vibracích lopatky modelu kola turbíny.\n
Influence of excitation frequency and pulse width on blade vibration
Voronova, Evgeniya ; Maturkanič, Dušan
The paper describes results of measuring of blade vibration characteristics excitation by one electromagnet at harmonic regime.The measurements were performed in the laboratory of rotational laser vibrometry originated at the Institute of Thermomechanics AS CR, v.v.i.\n
Analýza kmitání modelu kola turbíny
Voronova, Evgeniya ; Maturkanič, Dušan ; Procházka, Pavel ; Hodboď, Robert ; Košina, Jan
Ve zprávě jsou shrnuty a analyzovány výsledky ověřovacího měření kola při otáčkách 2000 min^-1 . Stanoveny účinky přítomnosti vakua nebo podtlaku na vibrace kola při otáčkách 100 min^-1a při otáčkách 500 min^-1 . Porovnání měření při odlišných otáčkách, s volným kmitáním nebo s vynuceným kmitáním.\n

Národní úložiště šedé literatury : Nalezeno 11 záznamů.   1 - 10další  přejít na záznam:
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.