National Repository of Grey Literature 100 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Mixed-use Building
Fibikar, Tomáš ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.
Office Building
Světlík, Adam ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of diploma thesis is the elaboration of project documentation of an office building in the northern part of the city of Brno-Medlánky. The office building is designed as a four-storey, without basement. The roofs are flat, and the facade is designed as a glazed curtain wall. The operation of the office building is divided into an administrative part, a commercial part and a cafe. The individual operations do not intersect. Next to the building is a parking lot for customers and employees. The structural system of the building is RC frame with reinforced concrete walls. The internal walls are made of aerated concrete and acoustic lime-sand blocks. The partitions are precast plasterboard. The ceilings are cast-in-place reinforced concrete slabs. The floors are heavy floating with hot water underfloor heating. Most of the flat roofs are green. The drawing part was processed in Revit and AutoCAD.
Kindergarten
Doseděl, Adam ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The main task of the thesis is to design a new building of kindergarten in Šumperk. Kindergarten is single-storey building with flat roof. In the bottom part are play room for the kids. In the middle of building is a utility room with heat pump and hot water cylinder, next to is a air conditioning machinery with heat recovery unit. In the upper of building is directors office, wind lobby and speech therapy classroom. The system of this building is masonry wall system. Main element is a sand-lime blocks. Ceiling in the building is a reinforced concrete slab and layers of thermal insulation. The conception of flat roof is a extensive green roof. This building is designed to zero energy building. The project has been processed in ArchiCAD, AutoCAD and Artlantis software.
Home for the elderly
Remešová, Kristýna ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
This master thesis describes the design of a detached two-storey home for the eldery in Holešov with seventeen apartment units. The thesis includes architectural and structural designs, concept of technical systems and assessment of the building’s energy performance. The last part of the master thesis is about the vegetated roof water-balance. On the first floor there are facilities, canteen, a doctor´s office, a caretaker´s office, hairdresser´s and pedicure, buffet, tool storage and eight apartment units (1+kk – seven flats, 2+kk – one flat). On the second floor there are caregiver´s office, rehabilitation room, common room with library, and nine apartment units (1+kk – seven flats, 2+kk –two flat). The building has concrete foundations. Loadbearing walls are made of ceramic blocks. Floor structures and staircase are designed from cast-in-place reinforced concrete. The building is covered with a flat extensive green roof. The envelope is insulated with ETICS. There are nineteen parking spaces on the plot. The drawings were elaborated in AutoCAD software.
The Hotel "On the View"
Brandýská, Veronika ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The content of this bachelor work is the project documentation of the hotel On the View in Nový Hradec Králové. The build has three ground floors, without partial basement and it is roofed by flat roof with pea gravel. A build has 2 parts. First part si for guests and second part is for employees. The build has 2 entrance. In the first floor is reception with facility, toilet, restaurant with kitchen, food warehouses, untility room and background for employees. From a restaurant is access to the terrace. In the second and third floor are rooms for 34 guests (of which 2 for handicapped) and background for cleaning women. A Hotel has car park for guests with 13 places ( of which 2 fort handicapped) and car park for employees with 4 places. The construction system is mostly made of polished ceramic blocks Porotherm. Horizontal construction is made up as Porotherm ceiling with brick inserts MIAKO and ceramic-concrete ceiling beams. Part of the proposal is thermal engineering assessment, fire safety solutions and assessments in terms of acoustic and daylight.
Home for the elderly
Hradilová, Tereza ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
Subject of the master thesis is detail design documentation of a home for the eldery. My building is located in the center of the village Chomýž. The thesis includes architectural and structural designs, concept of technical systems and assessment of the building’s energy performance. Home for eldery contains 8 apartments. My building is fully wheelchair accessible. The building has two floors. On the first floor there are four apartments, canteen, sanitary facilities and technical equipment. On the second floor there are four apartments, community centre, doctor and hairdresser. The foundations are made of concrete foundation strips. Load-bearing walls and non-load-bearing walls in all floors are made of ceramic blocks. The ceiling structure on all floors consists of precast floor slabs. The staircase is also designed as precasted. The building is covered with a flat extensive green roof. Thermal insulation of the facade will be made of polystyrene. The drawings were elaborated in AutoCAD software.
Residential Building Renovation
Horn, Jiří ; Stránská, Zuzana (referee) ; Struhala, Karel (advisor)
The aim of this diploma thesis is a renovation of a two-story family house in Dolní Krupá. The original house is from 1935. It has several newer outbuildings such as garage or storage spaces. The walls are made of solid fired bricks. There is a timber joist floor structure. The main building has a gable roof with timber roof truss. The outbuildings have flat and mono-pitched roofs. The reason for the renovation is the inefficiency of the aging building combined with nearing end of life of some building elements. Also, the layout of the building with multiple outbuildings built during its service life does not comply with contemporary housing standards. Therefore, a large part of the building will be demolished and replaced with new structures. Only the load-bearing walls on the first floor of the main building and the part of the building adjacent to the garage will remain. The new layout will consist of two separate apartments (one on each floor). The load-bearing structures will include ceramic masonry and reinforced concrete floor. The roof truss will be made of wood. The original appearance of the object will be preserved. The house will be heated with an air-to-water heat pump installed next to the north facade of the house. Each floor of the house will be air conditioned by a separated air conditioning unit. As the third part of the work, I chose a life cycle assessment (LCA), using several different building materials for a this renovation.
Kindergarten
Medová, Jana ; Kolář, Radim (referee) ; Struhala, Karel (advisor)
The main aim of the thesis is to design a Kindergarten. It is situated on the west outskirt of the Havlíčkův Brod on the plot no. 653/1 in the cadastral area Havlíčkův Brod. The plot is sloped to the south. The building has two above-ground floors. The ground floor is cross shaped, and we can consist of it on four parts. Three are classrooms with locker room, sanitary facilities for children and bed storeroom. The last part is technical facilities (storerooms, halls, utility room, control room and room for serving food). On the first floor there are offices for teachers, staff room, director’s room, and locker room for employees (cooks, cleaners). Food will be imported to kindergarten. My project is designed like a masonry wall system from sand-lime blocks Silka. Non-load bearing walls are from aerated concrete blocks Ytong. Floor structures are designed as pre-stressed concrete panels. Roof above the ground floor is flat intensive green roof and roof above the first ground floor is flat extensive green roof. The building is heated by two gas boilers in the utility room and and the whole is forcibly ventilated according to two air-conditioning units. I use Archicad 22 for designing my Kindergarten.
Office Building
Marek, Václav ; Ostrý, Milan (referee) ; Struhala, Karel (advisor)
The thesis describes design of an L-shaped two-storey office building in Chotěboř, which can work with saving energy and be careful to nature. Using renewable materials and new technical equipments. At the end of the design, there should be a building that will be architecturally interesting, energy-efficient and use renewable resources. It is a two-storey building, which is designed for office working and one part of building can be used for teaching science. Main roof on administration part has saddle shape, second roof on part which science centre has flat roof. Both roofs are intensive green roof overgrown with plants. For day illumination, there are design French windows with openings parts. Most of the first floor and the whole second floor belongs to offices and auxiliary staff rooms, toilets, etc. First floor also includes a small training centre with one classroom and necessary facilities (toilet, staff room, etc.). The load-bearing structures (foundations, walls, columns, floor and roof slabs, etc.) are designed from cast-in-place reinforced concrete. Load bearing vertical elements are walls, columns, and posts. Part of the first floor exceeding the layout of the second floor is covered with a flat green roof. Second floor is covered with a saddle green roof. All drawings and 3D rendering were done using ArchiCAD software.
Leisure Centre
Kladiva, František ; Struhala, Karel (referee) ; Košíčková, Ivana (advisor)
The subject of this diploma thesis is new building of leisure center, with two storeys and partial basement, near town Proseč (cadastral area Paseky u Proseče). There is catering and sanitary facilities downstairs and accomodation facility upstairs. In basement, there is storeroom for camping equipment. Next to the building is a plot of land used as a campground. The construction is largely designed as a diffusely open timber - cross-laminated timber walls, ceilings and roof, with thermal insulation. Underground part is made of concrete-filled blocks, with ceilings from pre-tensioned panels. The building is covered with a sadle roof with a sheet metal roofing. AutoCAD software was used to draw the drawing documentation.

National Repository of Grey Literature : 100 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.