Národní úložiště šedé literatury Nalezeno 2 záznamů.  Hledání trvalo 0.01 vteřin. 
Erosion capability of ultra-high-speed continuous waterjet and pulsating waterjet: the comparison
Sitek, Libor ; Hlaváček, Petr ; Klichová, Dagmar ; Trieb, F. ; Pude, F.
Advantages and possibilities of continuous ultra-high-speed waterjets (with\npressures of 600 MPa and more) when cutting metals are well known to\nthe professional public both from scientific studies and from practice. In addition\nto efficiency increased as water pressure increases and reduced water\nconsumption, abrasive consumption can also be reduced in the case of abrasive\nwaterjet. Ultra-high-speed waterjet technology allows not only to cut metal sheets\nwith pure water, but also allows cutting of harder materials such as ceramics.\nDespite the initial suspicion and technical problems associated with the reliability\nand sealing of some hyperpressure elements, high-pressure devices generating\nwater pressures around 600 MPa are now commercially available. However, no\ncomparison has been made so far concerning the efficiency of these jets with\nacoustically modulated high-speed pulsating waterjets using relatively low\npressures and higher water flow rates when eroding metallic materials.\nThe article compares cuts made by pure ultra-high-speed waterjet generated at\nhyperpressures (from 500 to 800 MPa) with erosive capabilities of pulsating\nwaterjets generated on the contrary at water pressures in the order of tens of MPa\non three metallic materials (stainless steel, mild steel and copper) using the same\njet hydraulic power.
Preliminary study using pulsating water jet for bone cement demolition
Hloch, Sergej ; Kloc, J. ; Foldyna, Josef ; Pude, F. ; Smolko, I. ; Zeleňák, Michal ; Sitek, Libor ; Hvizdoš, P. ; Monka, P. ; Monková, K. ; Kozak, D. ; Stoić, A. ; Sedmak, A. ; Milosevic, M. ; Lehocká, D. ; Mihalčinová, E.
The paper deals with the study of using the selective property of ultrasonic pulsating water jet for the disintegration of bone cement which creates the interface between femoral stem and trabecular bone tissue. For investigation, commercial bone cements were used. Bone cements were tested by nanoindentation in order to review their mechanical properties. A representative sample Palacos R+G was selected for disintegration of bone cement. Bone cements samples fixed between two plexiglasses were disintegrated using ultrasonic water jet and water jet generated by self-resonating nozzle at the pressure level of 20 MPa. Visualisation of bone cement demolition was provided with high speed 1 kHz cameras with two led pulsed sources. Potential were observed for using of pulsating water jet for bone cement demoliton during femoral stem extraction.

Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.