Národní úložiště šedé literatury Nalezeno 13 záznamů.  1 - 10další  přejít na záznam: Hledání trvalo 0.00 vteřin. 
Characterization and preparation of PVDF nanofiber matrices for wearable electronics
Zajacová, Lucia ; Papež, Nikola (oponent) ; Macků, Robert (vedoucí práce)
The presented bachelor thesis deals with the process of production PVDF nanofiber matrices uising electrospinning and subsequent electrical characterization of the produced material. At the beginning, it introduces nanotechnologies and their undeniable importance in medical applications. It focuses on the influence of process parameters, production enviroment and the very properties of the spinning solution itself, leading to final character of the spun fiber. Various morphological differences obtained by individual process settings then continue to influence their piezoelectric properties, which are the subject of the reaserch in the experimental part of this thesis. The obtained results are applied to devices uising the piezoelectric effect with the potential for application in the biotechnological fields.
Structural Analysis Of Gaas-Based Pv Cells After Ionizing Irradiation
Papež, Nikola
Morphology and structural analysis of photovoltaic cells based on GaAs before and after high dose gamma radiation of 500 kGy was investigated. Cobalt-60 emitter was used as the synthetic radioactive isotope. This radioactive form of cobalt is commonly used for space instruments and devices testing. Atomic force microscopy (AFM) was used to study the morphology and roughness differences. Cross-sectional investigation using transmission detector to thin layers observing was performed. Also, with use of sputtering system of Secondary Ion Mass Spectroscopy (SIMS) a detailed molecular and elemental information about the surface top layers was showed. Another molecular and structural changes in the top layers using two optical methods of Raman spectroscopy and spectrophotometry were also identified.
Elektrospřádaná vlákna na bázi PVDF a nylonu
Černohorský, Petr ; Sobola, Dinara (oponent) ; Papež, Nikola (vedoucí práce)
Polymerní nanovlákna využívané pro konstrukci triboelektrického nanogenerátoru (TENG) a piezoelektrického nanogenerátoru (PENG) jsou nové a perspektivní technologie pro získávání energie. Díky generování elektrické energie na základě mechanického pohybu (deformace) mohou tato vlákna najít uplatnění v oblasti samonapájených elektronických zařízení. V této práci byly pomocí elektrostatického zvlákňování připraveny tři nanovláknité struktury materiálů: čistý polyvinylidenfluorid (PVDF), čistý polyamid-6 (PA6) a jejich mísená kombinace PVDF/PA6. Pro studium vlastností nanovláken byly použity nedestruktivní analýzy jako Ramanova spektroskopie, FTIR, XPS a pozorování pomocí elektronového mikroskopu. Analýzy potvrdily pozitivní vliv elektrostatického zvlákňování polymerů na podporu tvorby vysoce polární krystalické -fáze u PVDF a , –fáze u PA6. Uspořádání struktury nanovláknitého materiálu a jejich defekty byly pozorovány rastrujícím elektronovým mikroskopem (SEM). Dále u materiálů byl měřen kontaktní úhel smáčivosti kapaliny na povrchu a bylo provedeno měření permitivity pro sledování dielektrických vlastností. Popsané výsledky činí mísený materiál PVDF/PA6 velice perspektivním pro další zkoumání v oblasti nanogenerátorů a funkčních textilů.
Energy dispersive X-ray spectroscopy of doped PVDF fibers
Smejkalová, Tereza ; Papež, Nikola (oponent) ; Sobola, Dinara (vedoucí práce)
This diploma thesis focuses on a flexible energy harvesting system based on piezoelectric polymer polyvinylidene fluoride (PVDF) with an emphasis on manipulating and optimising the properties and performance. By incorporating powders of piezo-active ceramics, the properties of piezoelectric polymer PVDF could be significantly improved and converted into useful electrical energy. PVDF was formed by electrospinning into fibres with a thickness of 1.5-0.3 µm and then studied with various analytical methods. This work offers a description of electrospinning, a preparation of samples for examination and a theoretical introduction to the analytical methods to which the samples were subjected. The morphology and distribution of the nanostructured ceramics into the PVDF polymer matrix was observed by scanning electron microscopy (SEM) and energy-dispersive Xray spectroscopy (EDX). For the formation of phase and detailed phase composition, the samples were comprehensively characterised by Fourier transform infrared spectroscopy (FTIR). The work also contains analysis in Raman spectroscopy, a method used to identify and compare chemical compounds. The electrical characteristics were studied by dielectric spectroscopy and the correlation with composition is provided. Individual components of doped fibres are characterised and discussed relating to their future use in sensors.
Degradation of GaAs Solar Cells
Papež, Nikola ; Pinčík,, Emil (oponent) ; Lazar, Josef (oponent) ; Sobola, Dinara (vedoucí práce)
Gallium arsenide based solar cells are among the most powerful types of solar cells available. Their main advantage is excellent resistance to thermal and ionising radiation, and therefore they are used primarily in demanding conditions. This dissertation describes the state of GaAs photovoltaic cells exposed to thermal stress, high cooling, gamma radiation and broad-spectrum laser irradiation. The samples were examined before, after and during these processes using several analytical and characterisation methods. The measurements were focused on the characterisation of the surface, optical and electrical properties. Limits and new behaviour of this type of photovoltaic cells have been discovered, which are also affected by thin protective and anti-reflective layers.
Characteristics Of Gallium Arsenide Solar Cellsat High Temperature
Papež, Nikola
This article reviews a work on processing of gallium arsenide (GaAs) solar cells. The performance of the cells before and after 300 _x000E_C thermal processing was correlated with topography identified by optical camera, atomic force microscope (AFM) and scanning electron microscope (SEM). Experiment indicates insignificant changes in topography of GaAs solar cells, but electrical characteristics show an excellent resistance of the samples to processing temperature.
Advanced Structural Analysis Of Silicon Solar Cells
Papež, Nikola
The study investigates the structural imperfections of photovoltaic cells based on polycrystalline silicon. Experimental characterization focuses in particular on the degradation and defects analysis. Two modern techniques were used – scanning electron microscopy (SEM) with electron beam induced current (EBIC) and 3D digital optical microscopy. The properties and range of cell defects that can significantly affect its function were characterized with this inspection and failure Analysis.
Morphological Structure Of Solar Cells Based On Silicon And Gallium Arsenide After Ion Etching
Papež, Nikola
Study deals with the investigation of the surface after ion etching on two types of solar cells – based on widely available polycrystalline silicon and on durable gallium arsenide for use in more demanding environments. Solar cell morphology was compared using an electron microscope together with an Energy Dispersive X-ray detector to show distribution ratios of elements. Atomic force microscopy was used to accurately describe the heights and roughness structure. Raman spectroscopy to study of vibrational properties and the stress investigations.
Implementace WebRTC v Open source PBX
Šalko, Jaroslav ; Papež, Nikola (oponent) ; Šilhavý, Pavel (vedoucí práce)
Tato práce se zabývá podporou WebRTC komunikace napříč vybranými Open Source PBX. Jmenovitě to jsou PBX Asterisk, FreeSWITCH a Kamailio. Práce je zejména zaměřena na způsob integrace WebRTC v jednotlivých PBX a obsahuje nezbytné kroky pro konfiguraci WebRTC. Práce také obsahuje analýzu šifrované komunikace, pomoci paketového analyzátoru Wireshark, kterou WebRTC vyžaduje. V teoretické části je čtenář seznámen s pojmem WebRTC a s protokoly, které souvisejí s tímto druhem komunikace. Účelem této části práce je přiblížit čtenáři princip fungování a podpůrné protokoly WebRTC. S tím souvisí i popis základních rozhraní WebRTC aplikací. Dále zde čtenář nalezne konfigurace vybraných Open Source PBX tak, aby byly schopny zprostředkovat audio a video komunikaci mezi WebRTC klienty. Tato část se dá rozdělit na podkapitoly, kdy se každá z nich věnuje tentýž problematice pro jednu z výše uvedených PBX. Na konci každé kapitoly, kde je krok za krokem nakonfigurovaná PBX, jsou provedeny testovací hovory. Tyto hovory jsou zachyceny paketovým analyzátorem Wireshark a slouží jako demonstrace funkčnosti WebRTC konfigurace. Praktická část obsahuje laboratorní úlohu pro studenty předmětu telekomunikační a informační systémy. V této úloze budou studenti krok za krokem konfigurovat WebRTC pro pobočkovou ústřednu Asterisk. Úloha obsahuje stručný popis implementace WebRTC v PBX Asterisk a okomentované kroky, nezbytné pro její konfiguraci. Postup je doplněn o demonstrační ukázky konfiguračních souborů. Dále studenti provedou analýzu šifrované komunikace, což je v případě WebRTC defacto tunelování SIP protokolu v protokolu HTTP.
Pobočková VoIP ústředna Asterisk a její nástavby
Melichar, Ondřej ; Komosný, Dan (oponent) ; Papež, Nikola (vedoucí práce)
Diplomová práce rozebírá možnosti open-source pobočkové ústředny Asterisk, popisuje její funkce a porovnává ji s několika jejími nástavbami. Je zde vysvětlen i pojem SIP stack a také jsou zde konkrétně uvedeni dva jeho zástupci. Dále jsou v práci vysvětlena bezpečnostní rizika technologie VoIP a jsou popsány a později realizovány jednotlivé možné útoky. V rámci testování je zkoumána i možnost vytvoření a realizace vlastního modulu, jeho následné implementace, přenositelnosti mezi jednotlivými nástavbami a jeho funkce.

Národní úložiště šedé literatury : Nalezeno 13 záznamů.   1 - 10další  přejít na záznam:
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.