National Repository of Grey Literature 95 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Boarding House
Balážová, Pavla ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The subject of this diploma thesis is a project for design documentation of boarding house which is oriented at south Moravia in the village Pavlov. The object is solved as four-storey with a partial recession of the first floor into the terrain. Boarding house will serve for the accommodation of 52 people. In the first floor, there is an entrance hall with reception, relaxing area and technical equipment of the building. In the second floor, there is a restaurant with a terrace and all necessary facilities for guests and restaurant staff. Two second highest floors are determined for guest accommodation. The construction of foundation is made from strip foundation. The structure is from bricks with monolith reinforced concrete frame in the first floor. It is a longitudinal wall system transversally reinforced by staircases. The perimeter walls will be insulated with ETICS system. The ceiling will be created from the prestressed reinforced concrete panels. Construction of roof is made from truss girders saddle type.
Car Museum
Suchý, Jakub ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The subject of these Master Thesis is a new building of Cars Museum. The object is located in Telc on street Radkovska, district Jihlava. This locality was chosen for its favorable conditions. In this area, there are lots of enthusiast and supporters of motorism. The nearest commission of veterans is around 50 km far. This museum is also meaning to improve a network of a commission of veterans. Telc is a beautiful historic city, which is an ideal choice for a museum of veterans. The building is divided into 3 imaginary sectors. The first one is an administrative part, which has two above-ground floors. In the first floor, there is educative room to familiarize guests with the history of vehicles, entry hall with reception, hygienic facilities for guests and base for staff and operations of the museum. In the second floor, there are offices for the museum, the commission of veterans, meeting room, storeroom, gaming-room, and daily room. The second part is the exhibition area. The third part is workshops and a base to remove operating fluids from cars. The investor is a passionate collector of historic vehicles and wants to share his collection with the public.
Apartment House
Beran, Tomáš ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Object of presented dissertation is proposition of apartment building. Apartment building is based on wood technology with two stages without cellar and with flat roof. Block of flats is designed with 8 flats. Some of them with big terrace. Object is situated in Olomouc, Czech Republic.
Winery
Koláčková, Jana ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The diploma thesis deals with project of a new building of winery production. Winery has one floor and a basement. We can split the winery into three parts. First part – production. This whole part is dedicaded to the production of wine. It consists of spaces where grapes are degraded, fermented, pressed, stored, bottled, labeled and subsequently exported. Production has a volume of 300 000 l of wine. Second part is for administration. There are two offices and a confrence room. Third part is for public using and it is composed of the tasting room with view at the wineyard and of the retail hall. The structural system is prefabricated skeleton of reinforced concrete. The roof is constructed as a flat green roof.
Sports Centre
Munzar, Daniel ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The subject of my diploma thesis is sports centre. There are 3 establishments. Main establishment is shooting range. Others are gun store and café. Floor 1S is almost completely under terrain and is designed with cast-in-place concrete. Ceiling above floor 1S is designed with cast-in-place concrete slab. Floor 1NP is designed with aerated concrete blocks with ventilated facade. Ceiling above 1NP is designed with prestressed concrete floor slabs. Roof was designed as flat roof with growing layer. The drawings were processed in a computer program ArchiCad.
Nursing Home
Kainráthová, Adéla ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The diploma thesis focuses on design of a nursing home in Planá nad Lužnicí. The building is freely standing on a flat land, with three above-ground floors. The entrance to the building is solved from the northeast side of the local road, the main entrance is oriented on the northwest side. The vertical support structures are made of Heluz brick blocks and covered with a mineral wool thermal insulation system. Horizontal structures are designed as reinforced concrete slabs. The building is roofed with a single-layer flat roof.
Mixed-use Building
Walek, Jakub ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The purpose of this diploma thesis is processing of ducumentary for mixed-use building in cadastre unit of village Vendryně. This building plot is situated on the outskirts of Vendryně. New building is designed as detached building, without cellar, with four floors. Wall structural system of building is made by sand-lime block. Floor and roof structure is consists of prestressed concrete floor. Roofing of house is made by flat green roof. On the first floor there are café, travel agency, dental laboratory, technical place and storage. The second floor is stated for administrative purposes. There are some offices, staff facilities, sanitary and technical places. On the third and fourth floors is situated dwelling unit. Three flats are in third floor and two flats are in fourth floor. Size of flats is designed as 2+KK and 3+KK.
Boarding House
Němec, Nikola ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The subject of this diploma thesis is a project of boarding house. The building is situated in moderate slope terrain in cadastral territory Znojmo-město. Boarding house capacity is 36 beds. Boarding house has three floors and is designed from the structural system Ytong. The ceilings are made of filigree floor panels. The roof of the house is built as flat vegetation roof. In the first floor there is located main entrance, reception desk and dining room. In the second and third floor there are rooms for guests.
Particle Polymer Composite in structural details of the building envelope
Dostálová, Darina ; Lavický, Miloš (referee) ; Vokoun,, David (referee) ; Matějka, Libor (advisor)
Due to a European energy concept for reducing energy consumption and also the concept of sustainable development, there is a growing demand for reduced energy consumption during the operation of the building and hence increasing demands on the thermal and mechanical properties of the building envelope. For this reason, it is necessary to look for materials that could meet both thermal and mechanical properties, as well as mechanical resistance and loadability, especially for the application for the foundations of the house, the base of the house and for application to structural details for elimination of the thermal bridges between interior and exterior boundaries. The main motivation for choosing the topic of thesis was to find materials derived from recycled or secondary raw materials that would be suitable for manufacturing composite applicable for structural details in the envelope of the building and for insulating in humid environment. An economic and environmental aspect plays an important role in the choice of material. The main theme of the thesis is the laboratory manufacturing of a composite with a thermoplastic matrix derived from recycled plastic materials and waste foam as a phase. Has been developed a unique Waste-based Particle Polymer Composite (WPPC) made from recycled foam and polypropylene. However, before WPPC can be reliably used by construction designers, physical properties of WPPC must be accurately identified. Therefore, it was designed laboratory manufacturing system and sample testing system, it was studied thermal, mechanical, thermomechanical and moisture absorptivity of WPPC. Application of finished composite material with satisfying thermal insulation properties to structural details to eliminate the thermal bridge, was the next step. These are details of the unloaded, prefabricated balconies, windows, atics, as well as basement constructions and the heel of the central load-bearing wall, the terrain flooring and the staircase wall
Detached House
Sikora, Marek ; Osička, Jan (referee) ; Lavický, Miloš (advisor)
The aim of this bachelor's thesis is the elaboration of project documentation of a detached house. The building is located in the village Smilovice on the parcel number 2444. This parcel has flat terrain. The object has no cellar, building has two floors and attic. Two floors are decided for the garage and living space. Over the second floor is located attic. The fundation strips are made from plain concrete. The vertical constructions are made from Liapor blocks. The horizontal constructions are made from Liapor´s panels. The roof is sloping.

National Repository of Grey Literature : 95 records found   1 - 10nextend  jump to record:
See also: similar author names
2 Lavický, Martin
Interested in being notified about new results for this query?
Subscribe to the RSS feed.