Národní úložiště šedé literatury Nalezeno 15 záznamů.  1 - 10další  přejít na záznam: Hledání trvalo 0.00 vteřin. 
Analýza vlivu délkových rozměrů na deformačně-napěťové stavy nalisovaných tenkostěnných a tlustostěnných válcových těles
Janýška, Jakub ; Kovář, Jaroslav (oponent) ; Šebek, František (vedoucí práce)
Práce se zabývá analýzou vlivu délkových rozměrů na deformačně-napěťové stavy nalisovaných tenkostěnných a tlustostěnných válcových těles. Obsahuje rešerši nalisovaných spojů a jejich využití. Odvození základních analytických modelů rotačně symetrických těles, které mohou být využity k řešení problému nalisovaného náboje na hřídel. Analytické řešení problému a jeho porovnání s numerickým řešením v programu ANSYS. Porovnání zahrnuje jak model bez tření, tak model s třením.
Výpočtové modelování nanoindentační zkoušky s Berkovičovým indentorem
Fiala, Lukáš ; Fuis, Vladimír (oponent) ; Kovář, Jaroslav (vedoucí práce)
Tato diplomová práce se zabývá výpočtovým modelováním nanoindentační zkoušky wolframu s Berkovičovým indentorem. V úvodu práce je provedena rešerše týkající se nanoindentační zkoušky a Oliver-Pharr analýzy. Další část práce je věnována deformačně-napěťové analýze nanoindentační zkoušky s použitím lineárně-elastického modelu materiálu wolframu a porovnání výsledků získaných s diamantovým a s dokonale tuhým indentorem. U následujícího výpočtového modelu jsou již uvažovány plastické deformace. S využitím výpočtového modelu s elasto-plastickým modelem materiálu jsou provedeny citlivostní analýzy vlivu rozměrů vzorku a indentoru a vlivu velikosti penetrace na výsledky určené pomocí Oliver-Pharr analýzy. Dále je na tomto modelu posouzena platnost korekčních faktorů nalezených v literatuře a stanovena jejich přesná hodnota. Poslední část práce se zabývá analýzou vlivu otupení indentoru na výsledky nanoindentační zkoušky a porovnáním různých přístupů určení průmětu kontaktní plochy.
Computation modelling of the nanoindentation test with the axisymmetric indenters
Ballo, Igor ; Fuis, Vladimír (oponent) ; Kovář, Jaroslav (vedoucí práce)
This diploma thesis deals with the nanoindentation test, which is increasingly used to determine the mechanical properties of materials. The entire process of nanoindentation and its advantages, such as the possibility of testing thin layers or different coatings, are described in more detail in the thesis. In addition, the basic methods of analytical processing of the resulting data using Sneddon’s, Hertz’s and Oliver-Pharr analysis are presented. The practical part of this thesis is focused precisely on the verification of these simplified analytical relationships using numerical models of the nanoindentation test of conical and spherical indenter created using the finite element method. In this part, not only the accuracy of the methods themselves is verified, but also the applicability and necessity of using modifications and corrections associated with these analyses. The test body consisted of tungsten material, the model of which was considered in one case as linear elastic and in the other as elasto-plastic. Knowledge from this work can be useful for further research in this area as well as for various applications of nanoindentation testing.
Napjatostně deformační analýza lávky u Jedovského mlýna
Hort, Michal ; Kovář, Jaroslav (oponent) ; Fuis, Vladimír (vedoucí práce)
Mostní objekty slouží denně mnoha lidem, proto je nutné zajímat se o jejich bezpečnost. Ke zvýšení bezpečnosti slouží výpočty mostních konstrukcí a tím se zabývá i tato práce. Konkrétně se jedná o analýzu lávky pro chodce nacházející se u Jedovského mlýna na řece Oslavě. K výpočtům napětí a deformace je použita obecná styčníková metoda, která je porovnávána s metodou konečných prvků. Při porovnání použitých metod se zjistilo, že metoda styčníková je vhodná na vytipování kritických míst, ale hodnoty napětí nedokáže určit přesně. Kdežto metoda konečných prvků dokáže, jak vytipovat kritická místa, tak stanovit přesné hodnoty napětí. Těmito výpočty jsou zjištěna kritická místa na dané konstrukci, která jsou v krajních prutech. Zvětšením jejich příčného průřezu by došlo ke zvýšení bezpečnosti konstrukce. Mezi kritická místa nepatří pruty poškozené od havárie lávky. Bezpečnost lávky vhledem k meznímu stavu pružnosti, která je k = 1,74, představuje dostatečnou rezervu k dalšímu používání lávky, i když nedojde k zvětšení příčných průřezů výše zmíněných prutů.
Analýza škodlivého kódu ve virtuálním prostředí
KOVÁŘ, Jaroslav
Diplomová práce se zabývá analýzou škodlivého kódu, který se analýze ve virtuálních prostředích vyhýbá (tj. evasivním malware). Práce obsahuje navrhnutou implementaci analytického prostředí, experimenty a vyhodnocení analýzy škodlivého kódu ve virtuálním prostředí, které ověřilo přínos provedených opatření na snížení odhalitelnosti analytického prostředí ze strany evasivního malware. Významným zdrojem inspirace pro některé postupy a opatření byly poznatky o výzkumu biologických virů.
Stress-strain analysis of stadium lighting mast
Tokoš, Richard ; Kovář, Jaroslav (oponent) ; Fuis, Vladimír (vedoucí práce)
The bachelor thesis contains an analysis of a steel structure that serves as lighting in a football stadium. The main goal is to create a bar system, the equation of static equilibrium and the deformation condition and I will analytically solve the stress and strain. Then I will create a model in ANSYS and calculate the stress and strain numerically. The bachelor thesis contains a comparison of the results of these methods.
Calculation of the probability of the endoprosthesis ceramic head with shape deviation
Kučerková, Miroslava ; Fuis, Vladimír (oponent) ; Kovář, Jaroslav (vedoucí práce)
The main content of the diploma thesis is to determine the probability of failure of the hip joint endoprosthesis ceramic head. The assumption is the three-axis state of stress. To calculate the probability of failure three principal stresses, which are determined numerically using finite element method, are needed. Ceramic materials, hip joint endoprosthesis and Weibull weakest link theory, which describes the calculation of the probability of failure of ceramic components, are described in the first part of the thesis, after that, the second part with calculations follows. The first model, for which the stress and probability of failure were calculated, is a cylindrical body. The stress distribution in it was determined numerically as well as analytically. Its primary goal is to verify the developed algorithm of calculating the probability of failure. This algorithm is also used in calculations of probability of failure of ceramic femoral head. The suitability of using averaged principal stress values was also verified here. In the next part of the thesis, a model of an ideal ceramic head was created and its probability of failure was calculated. The impact of friction, penetration and the size of elements used for discretization of the model on the value of probability of failure were all analysed. The evaluated findings were subsequently used in the calculations of the model of ceramic head with an deviation from the ideal ovality. The impact of this change on the resulting probability of failure in comparison with the ideal state was evaluated in the conclusion.
Mechanická analýza výtahu
Tesař, Jakub ; Kovář, Jaroslav (oponent) ; Fuis, Vladimír (vedoucí práce)
Bakalářská práce se zabývá analýzou 7-mi těles s uvažováním pasivních účinků. V první části práce jsou zde popsány základy statiky a dynamiky. Popis neutrálních a pasivních vazeb, metoda uvolňování a metoda redukce. Ve druhé části práce jsou popsány vlivy pasivních účinků na pohybový stav výtahu. Uvolnění jednotlivých těles proběhlo v programu GeoGebra. Cílem příkladu je určení určení stykových sil ve vazbách, kontrola funkčnosti vazeb a pohybového stavu. Řešení proběhlo ve výpočtovém programu Matlab.
Stress-strain analysis of the Gbely drilling tower
Vizváry, Peter ; Kovář, Jaroslav (oponent) ; Fuis, Vladimír (vedoucí práce)
The content of the bachelor's thesis is focused on the stress-strain analysis of a drilling tower located in Gbely. Its main goal is to compile equations of static equilibrium for the analytical solution of the structure and its subsequent numerical verification using the created 3D computational model based on various static loads or changes in the degree of static determinacy. The first part of this work summarizes the theory of the bar and of bar systems, the basic limit states and the finite element method (FEM). The second part contains a search on the history of oil production in Slovakia, its discoverer and the development of deep drilling and production technologies. The third part describes the drilling tower in Gbely. The content of the fourth part is the creation of a 3D computational model of a real structure, which should represent the drilling tower as accurately as possible. The most comprehensive is the fifth part, which consists of the design of a simplified structure, writing the equations of static equilibrium for the analytical solution, creating a 3D computational model for numerical verification of the analytical solution and evaluating the conclusions to which the individual variants of the solution led.
Calculation of the probability of the ceramic component failure according to the Weibull’s weakest link theory
Kučerková, Miroslava ; Fuis, Vladimír (oponent) ; Kovář, Jaroslav (vedoucí práce)
Weibull weakest link theory is used to determine the probability of failure of ceramic components. This bachelor thesis examines the cylindrical body, beams and rotating circular and intercircular disc. In these bodies it is possible to identify course of the stress in an analytical way. The research part of the work approaches ceramic materials in terms of their structure, composition, method of production or mechanical properties. From a theoretical point of view, Weibull weakest link theory for uniaxial and triaxial stress in the body is described and required relations for further calculations are given here. In the second part, the probability of failure of previously mentioned models is calculated. Beams are stressed by a simple and four - point bending. The impact of the body size on the probability of failure is also analyzed. The cylindrical body is solved for different variants, which are compared afterwards. At last, the effect of operating speed on the probability of failure of the rotating circular and intercircular disc is investigated.

Národní úložiště šedé literatury : Nalezeno 15 záznamů.   1 - 10další  přejít na záznam:
Viz též: podobná jména autorů
12 KOVÁŘ, Jakub
44 KOVÁŘ, Jan
5 KOVÁŘ, Jaroslav
9 KOVÁŘ, Jiří
9 Kovár, Jiří
7 Kovář, J.
12 Kovář, Jakub
44 Kovář, Jan
7 Kovář, Jaromír
2 Kovář, Jindřich
9 Kovář, Jiří
4 Kovář, Josef
5 Kovář, Jáchym
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.