Národní úložiště šedé literatury Nalezeno 10 záznamů.  Hledání trvalo 0.00 vteřin. 
Creepová analýza VT vnitřního tělesa DSPWR - porovnání creepových modelů
Masák, Jan ; Gabriel, Dušan ; Hrubý, Zbyněk ; Plešek, Jiří
Zpráva shrnuje výsledky II. etapy rešení creepové analýzy vysokotlakého vnitrního telesa Doosan Škoda Power. V první cásti zprávy jsou strucne popsány dva standardní modely creepu popisující sekundární (Nortonuv zákon) a primární (Nortonuv-Baileyuv zákon) fázi tecení materiálu, vcetne výsledku verifikacních výpoctu. V druhé cásti jsou presentovány výsledky všech provedených výpoctu na vysokotlakém vnitrním VT telese s použitím uvažovaných modelu creepu.
Numerical calibration of material parameters of selected directional distortional hardening models with combined approach using both distorted yield surfaces and stress-strain curves
Hrubý, Zbyněk ; Plešek, Jiří ; Parma, Slavomír ; Marek, René ; Feigenbaum, H. P. ; Dafalias, Y.F.
The plastic strain induced anisotropy is a well-known phenomenon in manufacturing and directional distortional hardening represents a very promising way to capture real plastic behavior of metals. Many papers were published in the past typically extending the von Mises yield criterion with directionally dependent internal variable and defining yield point at the basis of plastic strain offset. Material parameters of these models were typically calibrated at the basis of deformed yield surfaces only, which – as revealed – could lead to certain discrepancies in simple stress-strain response. Presented paper introduces a numerical calibration approach taking both distorted yield surfaces and stress-strain curves information into account. Besides the calibration procedures, innovative applications of experimental techniques such as the acoustic emission for an acquisition of yield inception and plastic straining, convexity of the models, or numerical implementation of these models are discussed.
Case study using the creep probabilistic exponential model and explicit integration method with time step control
Gabriel, Dušan ; Hrubý, Zbyněk ; Masák, Jan ; Plešek, Jiří ; Kopačka, Ján ; Pařík, Petr ; Straka, F. ; Albl, P.
The issues concerning accuracy and stability control of original explicit algorithm for integration of differential systems arising from viscoplastic or creep finite element analyses was explored. The attention was focused on the investigation of the numerical stability for complex creep probabilistic exponential model with damage.
Experiments in directional distortional hardening—determination of mechanical properties of the S355J0 grade structural steel
Parma, Slavomír ; Ciocanel, C. ; Seiner, Hanuš ; Hrubý, Zbyněk
In order to carry out comprehensive experiments in the research of directional distortional hardening phenomenon, some basic mechanical properties of S355J0 structural steel are determined. Particularly, attention is payed to the determination of elastic properties of the material, determination of anisotropy of the material induced by the manufacturing technology of specimens, and determination of elasto-plastic behavior of the material. Elastic properties of the material are measured via an ultrasound method, elasto-plastic behavior is analyzed from the tensile and torsional testing. Conclusions of the report are intended for design and evaluation of the comprehensive experiments mentioned.
Creepová analýza VT vnitřního tělesa DSPWR - shrnutí za rok 2014
Hrubý, Zbyněk ; Gabriel, Dušan ; Kopačka, Ján ; Plešek, Jiří
Předmětem předkládané technické zprávy jsou teplotní, statické pevnostní a creepové výpočty VT vnitřního tělesa DSPWR. MKP síť spolu s teplotním i statickým zatížením tělesa byly dodány zadavatelem. Výsledkem je vyhodnocení teplotních a napěťových polí VT tělesa a dále zbytkových deformací v dělicí rovině po odlehčení, vychladnutí a demontáži.
Identification of Parameters of the Feigenbaum-Dafalias Directional Distortional Hardening Model
Parma, Slavomír ; Plešek, Jiří ; Hrubý, Zbyněk ; Marek, René ; Feigenbaum, H. P. ; Dafalias, Y.F.
Distortion of yield surface was observed in numerous experiments with various types of metals. The distorted surface shows high curvature in the direction of load and flattening in the opposite direction. Feigenbaum and Dafalias (2008) proposed a new phenomenological model to capture this phenomenon. In sum, Feigenbaum-Dafalias directional distortional model includes six independent material parameters to be identified. The present paper describes an identification algorithm for parameters of the model.
Posudek metodiky hodnocení VERLIFE 2013-Příloha C (INTEGRITY AND LIFETIME ASSESSMENT PROCEDURE OF RPV INTERNALS IN WWER NPP'S DURING OPERATION)
Gabriel, Dušan ; Pták, Svatopluk ; Hrubý, Zbyněk ; Machová, Anna ; Plešek, Jiří ; Krásný, I.
Zpráva obsahuje posudek metodiky hodnocení VERLIFE 2013-Příloha C (INTEGRITY AND LIFETIME ASSESSMENT PROCEDURE OF RPV INTERNALS IN WWER NPP'S DURING OPERATION)
Modelování procesu nanoindentace a mikroindentace moderních niklových superslitin pro letecké motory
Hrubý, Zbyněk ; Plešek, Jiří ; Tin, S.
Představu o rozložení napětí a deformace může dát například metoda konečných prvků. Modelovány jsou procesy indentace kulovým, kuželovým a Berkovichovým indentorem. Jako referenční a do jisté míry i verifikační model je simulována indentace isotropního materiálu (hliníku). Poznatky jsou poté převedeny do modelování indentace ortotropních materiálů (přesněji pseudoisotropních) jako jsou niklové superslitiny s užitím nelineární formulace mechaniky kontinua a velkých plastických deformací.
Modelování procesu nanoindentace a mikroindentace
Hrubý, Zbyněk ; Plešek, Jiří ; Tin, S.
S pomocí metody konečných prvků může být zjištěna informace o rozložení napětí a deformace pod různými druhy indentorů. V práci je představena úloha numerického modelování indentace isotropního hliníku jako validační a verifikační problém pro testování algoritmů plasticity a kontaktu. Poznatky jsou následně převedeny do reálné situace modelování ortotropních materiálů jako jsou niklové slitiny s využitím homogenizačního přístupu pro získání makroskopických vlastností materiálu.
Energeticky konjugované míry napětí a deformace v mechanice kontinua
Hrubý, Zbyněk ; Plešek, Jiří
Energeticky konjugované míry napětí a deformace vystupují v konstitutivních vztazích pro popis chování materiálu. V současné dobe je užívána celá řada tenzorů deformace, z nichž některé jsou diskutovány v článku. Hlavním cílem příspěvku je provedení odvození energeticky konjugovaného tenzoru napětí k libovolnému Lagrangeovskému tenzoru deformace.

Viz též: podobná jména autorů
1 Hrubý, Z.
3 Hrubý, Zdeněk
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.