Národní úložiště šedé literatury Nalezeno 14 záznamů.  1 - 10další  přejít na záznam: Hledání trvalo 0.01 vteřin. 
Applications of blade vibration measurements in the laboratory of rotational laser vibrometry
Maturkanič, Dušan ; Procházka, Pavel ; Hodboď, Robert ; Mekhalfia, Mohammed Lamine ; Voronova, Evgeniya
The Laboratory of Rotational Laser Vibrometry was established at the Institute of Thermomechanics AS CR, v.v.i. in 2015 and the first experiments were started the following year. The measurements are intended for the research of vibration of rotating blades. The paper includes a summary of measurement results using a special turbine model and their consequences in theoretical research, as well as measurements with a real compressor of aircraft engine and comparison with computational analysis. The paper also describes the complex system for measurement and analysis.
Identification of the blade tip possition and measurement techniques using the BTT method
Maturkanič, Dušan ; Procházka, Pavel ; Hodboď, Robert ; Mekhalfia, Mohammed Lamine
This paper describes the existing practice in identifying and defining the position of the blade tips and the relevant technique for measuring their vibration during rotation. In connection with the effort to precisely define the position of the vibrating blade, the paper also analysed the possibilities of unambiguous determination of its position. This work creates a parallel branch to signal processing in the complex system of precision measurement and analysis of blade vibration, which was mentioned in previous papers.
Vibration mode shape extraction of bladed disk
Mekhalfia, Mohammed Lamine ; Procházka, Pavel ; Tchawou Tchuisseu, Eder Batista ; Maturkanič, Dušan ; Hodboď, Robert
This research paper deals with the experimental protocol followed to visualize the vibration mode shape of an aero-engine bladed disk. This study is based on a comparison between the numerical results obtained through Finite element methods (FEM) using ANSYS software and experimentally using the laser Doppler vibrometer. Therefore the bladed disk was transformed into a 3D virtual environment and structural analysis was performed. The results demonstrate a match between the numerical and the experimental one, this match offers the possibility for using the model for future studies.
Two-way fluid structure interaction study of aero-engine compressor blade vibration under air excitation
Mekhalfia, Mohammed Lamine ; Procházka, Pavel ; Tchawou Tchuisseu, Eder Batista ; Maturkanič, Dušan ; Hodboď, Robert
In this paper, we provide a numerical method via FEM software (ANSYS) using two-way Fluid-Structure Interaction (FSI) solver to estimate the blade’s vibration where the force used to excitation is a continuous air jet. This will help to provide data to diagnostic blade condition and health monitoring and a bridge toward a precise study of the blade’s dynamic under rotation and the estimation of blade’s displacement to define the amplitude and the frequency that occurs under different types of excitation which is a pillar for the process of machine condition and health monitoring.
Numerical estimation of blade displacement due to air excitation
Mekhalfia, Mohammed Lamine ; Procházka, Pavel ; Tchawou Tchuisseu, Eder Batista ; Hodboď, Robert ; Maturkanič, Dušan
For the last few years, vibration measurement has taken an intense interest from research activities. For this reason, this article considers, besides vibration measurements, the impact of air forced excitation on blade motion, displacement and vibration through both simulation analysis and The Transformation of mathematical analysis that explain the interaction between fluid (Air) and the structure (Blade) into numerical setup along with FEM analysis through ANSYS Software. 3D Blade was created to meet the same characteristics of the real blade to enable real environment criteria for the simulation.
Dynamics of a magnetically excited blade: theoretical and experimental analysis
Tchawou Tchuisseu, Eder Batista ; Procházka, Pavel ; Mekhalfia, Mohammed Lamine ; Hodboď, Robert ; Maturkanič, Dušan
This work dealt with the theoretical and experimental analysis of a static blade subjected to a magnetic excitation. The theoretical analysis combines the modeling and design of the blade via ANSYS in whih the modal analysis is done. Both methods showed qualitative agreement of the results.
Applicability of the deterministic methods in blade tip-timing analyses
Maturkanič, Dušan ; Procházka, Pavel ; Hodboď, Robert ; Tchawou Tchuisseu, Eder Batista
The paper describes the possible use of the deterministic methods for analyses of blade vibration. In this respect, the main attention is focused on turbine rotor speed instabilities which could cause inaccuracy of results. The initial method and approach were presented in previous works. The measurements were performed in the Laboratory of the rotational laser vibrometry in the Institute of Thermomechanics, Academy of Sciences of the Czech Republic.
Teoretický popis měřených signálů pro vyhodnocení kmitání lopatek turbíny metodou BTT a stanovení jejich nepřesnosti
Maturkanič, Dušan ; Procházka, Pavel ; Košina, Jan ; Voronova, Evgeniya ; Hodboď, Robert
Zpráva popisuje výsledky měření kolísajících otáček lopatkového kola turbíny pro vyhodnocování kmitání lopatek metodou Blade Tip-Timing a stanovení funkce jejich změny. Komplikace, které se vyskytovaly při zpracování naměřených hodnot, vedly k detailnějšímu rozboru zaznamenaných dat, pro něž je proveden teoretický popis charakteristik získaných signálů. Měření byla prováděna pro čtveřici režimů a při dvou odlišných podmínkách měření. V návaznosti na předchozí práci je součástí zprávy rovněž vyhodnocení kontrolních měření po provedených softwarových úpravách měřicího systému.
Analýza principu buzení kola turbíny magnety při různých režimech
Voronova, Evgeniya ; Maturkanič, Dušan ; Procházka, Pavel ; Hodboď, Robert
Ve zprávě je provedena analýza principu buzení vynuceného kmitání kola pomocí magnetů zapnutých v režimech: harmonickém, pulsním, pulsně-synchronním na IRC (encoder) a pulsně-synchronním na IRC (encoder) a tenzometr. Dále se ověřoval vliv šířky pulsu a frekvence buzení axiálního magnetu na vibracích lopatky modelu kola turbíny.\n
Analýza kmitání modelu kola turbíny
Voronova, Evgeniya ; Maturkanič, Dušan ; Procházka, Pavel ; Hodboď, Robert ; Košina, Jan
Ve zprávě jsou shrnuty a analyzovány výsledky ověřovacího měření kola při otáčkách 2000 min^-1 . Stanoveny účinky přítomnosti vakua nebo podtlaku na vibrace kola při otáčkách 100 min^-1a při otáčkách 500 min^-1 . Porovnání měření při odlišných otáčkách, s volným kmitáním nebo s vynuceným kmitáním.\n

Národní úložiště šedé literatury : Nalezeno 14 záznamů.   1 - 10další  přejít na záznam:
Viz též: podobná jména autorů
2 Hodboď, Radek
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.