|
|
The reactive power compensation of the industrial consumer
Pospíšil, Zdeněk ; Holoubek, Jiří (referee) ; Toman, Petr (advisor)
This bachelor thesis deals with the reactive power compensation. The reactive power compensation falls into an important measures reducing current load of electrical grids and other equipments, which increase its lifespan and decrease energy losses. The bachelor thesis is divided into a theoretical and a practical part. In the theoretical part is explained the theory necessary for good understanding of compensation, explained the sanctions and the additional fees for unsatisfactory power factor and summarized the impacts of compensation on the electrical network. Further is shown the basic classification of compensation by its place of connection, type of compensation device and regulation. The end of theoretical part is dedicated to the simple calculation of compensation. The practical part deals with the real design of the reactive power compensation for a particular industrial consumer.
|
|
|
Reactive Power Compensation of The Industrial Consumer
Hanzelka, Jiří ; Holoubek, Jiří (referee) ; Toman, Petr (advisor)
This thesis is focused on reactive power compensation and it suggests new conceptions for industrial customers. The first part describes the basics of compensation, location and ways of compensation. In conclusion of this part it is a good example of parallel reactive power compensation. The second part deals with the design of reactive power compensation specifically for raw water pumping station. Compensation was solved both on a low voltage level and on the high voltage level. For drawings were used program EPLAN Electric P8.
|
|
|
Design of reactive power compensation in distribution network
Popek, Jiří ; Holoubek, Jiří (referee) ; Lázničková, Ilona (advisor)
This thesis is about reactive power compensation in industrial network. Task is design reactive power compensation devices, so that the power factor, which is main indicator of power quality, was within the limits required by the distributor. This is applied to wholesale customers of electrical energy. Reactive power consumed by appliances increased the current that flows through the network, transmission losses and voltage drop. Reactive power compensation is a measure reducing load current and ohmic losses in a supply line. Given that the compensation is one of the significant cost-saving measures in electric power distribution. Distributor requires electric power consumption with a lagging power factor in the range from 0,95 to 1. Other values of power factor are penalized.
|
|
|
Integration of a co-generation unit to industrial power system
Kučera, Michal ; Holoubek, Jiří (referee) ; Drápela, Jiří (advisor)
This master's thesis deals with the integration of a mine gas burning cogeneration unit into industrial power system. The aim of the thesis is to design and evaluate different possibilities of integration the cogeneration unit into industrial power system. The first, theoretical part of the thesis discuss about cogeneration (combined heat and power). The technologies used for cogeneration are summed up as well as the possibilities of usage. The next part deals with the mine gas as the fuel for the cogeneration units. The lasts chapters of the theoretical part talks about terms for installation power source into industrial power system and about the possibilities of overflow of the electricity into distribution power system. The practical part deals with the installation of the 600 kW cogeneration unit into particular industrial power system. Four possibilities of operation mode of the cogeneration unit are design. At the end of the thesis the brief economical evaluation is accomplished.
|
|
|
Reconfiguration of an industrial distribution system including local power source integration
Benetka, Tomáš ; Holoubek, Jiří (referee) ; Drápela, Jiří (advisor)
This bachelor´s thesis deals with reconfiguration of industrial network that has been technologically reconstructed. The aim of this study is mostly to describe changes made on devices used for reactive power compensation and improving the power quality. Thesis is divided into two parts. Theoretical part of thesis deals with parameters used for judging power quality and causes of changes for these parameters, eventually with devices for its adjustment. Standard demands for these parameters are also included. Further, reactive power compensation, extract of reactive power appliance and their influence on power network is described in this thesis. In the second - practical - part devices used for reactive power compensation were reconstructed. This part is also focused on local energy source integration and usage of power electronic engineering products for power quality provision.
|
|
|
Design of supply network configuration for large engineering company
Němec, Jan ; Holoubek, Jiří (referee) ; Topolánek, David (advisor)
This master-thesis analyzes issues of suggestion configuration of power supply network of industrial business. The option of the scheme of the configuration, the voltage level, the way of compensation of the reactive power, the way of the suppretion of the energetic interference and other requirements is included in the main tasks. This option has to be convenient with the requirements of the industrial business. The important point of this proposal is to prevent the influence of the superordinate distribution network. The compensation which keeps the power factor in the prescribed limits is one of the precautions against the influencing of the network. The second precaution is the elimination of energetic interference. The higher voltage, the fluctuation and the asymmetry of the voltage are the interferences which have the biggest impact on the industrial networks. The master-thesis offers the summary of the possibilities and ways of the elimination of the basic elements of the energetic interference.
|
|
|
Reactive Power Compensation of The Industrial Consumer
Hanzelka, Jiří ; Holoubek, Jiří (referee) ; Toman, Petr (advisor)
This thesis is focused on reactive power compensation and it suggests new conceptions for industrial customers. The first part describes the basics of compensation, location and ways of compensation. In conclusion of this part it is a good example of parallel reactive power compensation. The second part deals with the design of reactive power compensation specifically for raw water pumping station. Compensation was solved both on a low voltage level and on the high voltage level. For drawings were used program EPLAN Electric P8.
|
|
|
Reconfiguration of an industrial distribution system including local power source integration
Benetka, Tomáš ; Holoubek, Jiří (referee) ; Drápela, Jiří (advisor)
This bachelor´s thesis deals with reconfiguration of industrial network that has been technologically reconstructed. The aim of this study is mostly to describe changes made on devices used for reactive power compensation and improving the power quality. Thesis is divided into two parts. Theoretical part of thesis deals with parameters used for judging power quality and causes of changes for these parameters, eventually with devices for its adjustment. Standard demands for these parameters are also included. Further, reactive power compensation, extract of reactive power appliance and their influence on power network is described in this thesis. In the second - practical - part devices used for reactive power compensation were reconstructed. This part is also focused on local energy source integration and usage of power electronic engineering products for power quality provision.
|
|
|
The reactive power compensation of the industrial consumer
Pospíšil, Zdeněk ; Holoubek, Jiří (referee) ; Toman, Petr (advisor)
This bachelor thesis deals with the reactive power compensation. The reactive power compensation falls into an important measures reducing current load of electrical grids and other equipments, which increase its lifespan and decrease energy losses. The bachelor thesis is divided into a theoretical and a practical part. In the theoretical part is explained the theory necessary for good understanding of compensation, explained the sanctions and the additional fees for unsatisfactory power factor and summarized the impacts of compensation on the electrical network. Further is shown the basic classification of compensation by its place of connection, type of compensation device and regulation. The end of theoretical part is dedicated to the simple calculation of compensation. The practical part deals with the real design of the reactive power compensation for a particular industrial consumer.
|
|
|
Integration of a co-generation unit to industrial power system
Kučera, Michal ; Holoubek, Jiří (referee) ; Drápela, Jiří (advisor)
This master's thesis deals with the integration of a mine gas burning cogeneration unit into industrial power system. The aim of the thesis is to design and evaluate different possibilities of integration the cogeneration unit into industrial power system. The first, theoretical part of the thesis discuss about cogeneration (combined heat and power). The technologies used for cogeneration are summed up as well as the possibilities of usage. The next part deals with the mine gas as the fuel for the cogeneration units. The lasts chapters of the theoretical part talks about terms for installation power source into industrial power system and about the possibilities of overflow of the electricity into distribution power system. The practical part deals with the installation of the 600 kW cogeneration unit into particular industrial power system. Four possibilities of operation mode of the cogeneration unit are design. At the end of the thesis the brief economical evaluation is accomplished.
|
guest ::
RSS feed.