|
|
Rationalization project of workplace for Hot-water Heater welding
Varjan, Matúš ; Heinl, Zdeněk (referee) ; Rumíšek, Pavel (advisor)
The aim of the thesis is to rationalize the water heaters welding area in Tatramat company - ohrievače s.r.o. The rationalization consists of three parts. The first part deals with the arrangement of the workplaces, the second part re-evaluates the monthly production planning. The third part describes in detail the production of one type, which based on simulations created in the simulation software Witness, compares the recorded time in company informartion system Orfert to the real production time in the operation. Each individual part offers optimization proposals and merging them into one unit, will create an efficient, transparent and economically value adding rationalization of the water heaters welding area.
|
|
| |
|
|
Project of grouping for brass bearing separators production
Křížek, Stanislav ; Heinl, Zdeněk (referee) ; Rumíšek, Pavel (advisor)
This diploma thesis deals with a project to centralize the production of brass cage bearings in the company ZKL Hanušovice, a.s. The first part is focused on the description of the current production process, which has many disadvatages. From the analysis of these disadvantages we can make suggestions for making the production process more effective. The second part of the thesis focuses on these suggestions for the cetralized production proccess. The best of these suggestions has been elaborated into a technological project including capacity calculation and technical drawings. The final part of the thesis provils a technical-economic evaluation of the project, focusing mainly on the efficiency of investment in new production equipment and its impact on company management.
|
|
|
Proposal of change company organization structure
Svobodová, Elena ; Heinl, Zdeněk (referee) ; Heralecký, Tomáš (advisor)
The aim of this diploma thesis is to suggest new organization structure in the industry company, the main is to focus on individual organization components and to specify goals, which would be achieved by this restructure. The proposal of new enterprise organization structure is made on basics of analysis of present situation in company, provided information and internal sources from employees and Management Company. In scope of this diploma thesis I suggested new organization structure, which faces to improve of its efficiency – decreasing of costs and increasing of productivity.
|
|
|
Optimization in conveyer rollers production
Veverka, Štěpán ; Heinl, Zdeněk (referee) ; Rumíšek, Pavel (advisor)
Presented document deals with optimization in conveyer rollers production in accordance with rationalizing project for Transroll – CZ, s.r.o. company. With consideration of available literature from section of technological projection and technology of machining, the industrial process is analyzed with focus on material flow and layout solution of factory shop. Consecutively the options of possible machines allocation are designed, which eliminate some disadvantages of default position. Selection of suitable option, its evaluation and technical-economic evaluation of whole project are also parts in this document.
|
|
|
Technological project of production line for plastic windows
Nejedlý, Jindřich ; Heinl, Zdeněk (referee) ; Rumíšek, Pavel (advisor)
This master’s thesis focuses on rationalization of production line for plastic windows production in RI OKNA a.s. (Inc.). Evaluation of production line’s current estate is being done as well as weak point detection. On these bases some new variations for improvement are being suggested. The winning variation is drown up into the technological project and put through an economical evaluation.
|
|
|
Rationalization project of air-filters production
Buďa, Vojtěch ; Heinl, Zdeněk (referee) ; Rumíšek, Pavel (advisor)
This thesis deals with rationalization layout of air and fuel filters production in the company MANN-HUMMEL (CZ) s.r.o., which ensures minimization of work in process and design optimal load of production on the basis measured and analyzed times operations of production. Part of thesis is the design layouts of workplace with selection of optimal variation which provides shortening and better overview on flow of material production.
|
|
|
Rationalization project of air-filters production
Buďa, Vojtěch ; Heinl, Zdeněk (referee) ; Rumíšek, Pavel (advisor)
This thesis deals with rationalization layout of air and fuel filters production in the company MANN-HUMMEL (CZ) s.r.o., which ensures minimization of work in process and design optimal load of production on the basis measured and analyzed times operations of production. Part of thesis is the design layouts of workplace with selection of optimal variation which provides shortening and better overview on flow of material production.
|
|
|
Optimization in conveyer rollers production
Veverka, Štěpán ; Heinl, Zdeněk (referee) ; Rumíšek, Pavel (advisor)
Presented document deals with optimization in conveyer rollers production in accordance with rationalizing project for Transroll – CZ, s.r.o. company. With consideration of available literature from section of technological projection and technology of machining, the industrial process is analyzed with focus on material flow and layout solution of factory shop. Consecutively the options of possible machines allocation are designed, which eliminate some disadvantages of default position. Selection of suitable option, its evaluation and technical-economic evaluation of whole project are also parts in this document.
|
|
|
Rationalization project of workplace for Hot-water Heater welding
Varjan, Matúš ; Heinl, Zdeněk (referee) ; Rumíšek, Pavel (advisor)
The aim of the thesis is to rationalize the water heaters welding area in Tatramat company - ohrievače s.r.o. The rationalization consists of three parts. The first part deals with the arrangement of the workplaces, the second part re-evaluates the monthly production planning. The third part describes in detail the production of one type, which based on simulations created in the simulation software Witness, compares the recorded time in company informartion system Orfert to the real production time in the operation. Each individual part offers optimization proposals and merging them into one unit, will create an efficient, transparent and economically value adding rationalization of the water heaters welding area.
|
guest ::
