|
|
Structural assessment of the reinforced concrete chimney
Teplý, Jakub ; Hasala, Ivo (referee) ; Girgle, František (advisor)
The aim of this thesis is assessment of existing condition reinforced concrete factory chimney, who has undergone structural and technical survey, under which was found many failures caused of horizontally tension - significant vertical cracks in the chimney stack. The object of this work will also make appropriate proposals rehabilitation of concrete stack by design prestressed cables monostrand in horizontal direction, grouting open cracks and reprofiling surface of chimney stack.
|
|
| |
|
|
Reinforced concrete frame construction
Hons, Filip ; Hasala, Ivo (referee) ; Šulák, Pavel (advisor)
Master´s thesis focuses on the design of monolithic reinforced concrete structures storey hose which consist of 2 underground and 6 floors. This project deals whit two different boards, board over ground floor and over second floor, as well as three pillars supporting board, separate staircase placed in a reinforced core, base plate. All calculations are done according to applicable standards, mainly according to ČSN EN 1992-1-1.
|
|
|
Load-bearing RC structure of the multi-storey building
Petrovič, Jiří ; Hasala, Ivo (referee) ; Girgle, František (advisor)
The Master’s thesis is focused on the analysis and design of selected members of load-bearing structure of an apartment house according to the ultimate limit states (ULS) and seviceability limit states (SLS). The calculation and the analysis was supported by design software SCIA ENGINEER 2017. Structural analysis deals with the design of the reinforced concrete floor slab of 1.PP, beams in 1.PP, selected walls in 1.NP and column in 1.PP and 1.NP. Thework beside this deals with the calculation and design of foundation of the object.
|
|
|
Chimney load bearing structure
Hasala, Ivo ; Girgle,, František (referee) ; Šimůnek, Petr (advisor)
My chachelor work solves the static diagram shaft of the contemporary stach, a load, an analyse of inside powers in the programme SCIA ENGINEER and a review combination load M + N. The contemporary steel reinforcements is an appreciating to definite the combination load in six horizontal cuts along the height stach. My calculation includes the produce algorithm in the programme MS EXCEL for the appreciating choice intercircular cats of stach on the combination load M + N.
|
|
|
Load-bearing reinforced concrete construction
Klajba, Daniel ; Hasala, Ivo (referee) ; Šulák, Pavel (advisor)
The aim of diploma thesis is to design monolithic reinforced concrete underground structure, which is partly under existing building and partly will form the basis of a new outbuilding. Structure is designed as white tub, whitout any additional isolations against water a ground humidity. All structure elements (slabs, walls, beams) was designed according to standard ČSN EN 1992-1-1 for ultimate and serviceability limit state. Structural analysis was performed using Scia Engineer 2013 – Student version. The results were validated by simplyfied manual method.
|
|
|
Reinforced concrete structure
Hasala, Ivo ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
In my master´s thesis I deal with static solution of basic elements of reinforced concrete building with two abovegrounds and one underground storey. The selected elements are piles, roof board D1, column S1 in 2NP, stairway SK1 in 1NP, beam Z1 in 2NP, wall ST6 in 2NP, exterier board near the steel stairway. The component of my master´s thesis is comparing of my own calculation of moments and computer calculation of roof board D1. In the last point I compare a behavior of the structure with solid support and with piles.
|
|
|
Load-bearing RC structure of the multi-storey building
Petrovič, Jiří ; Hasala, Ivo (referee) ; Girgle, František (advisor)
The Master’s thesis is focused on the analysis and design of selected members of load-bearing structure of an apartment house according to the ultimate limit states (ULS) and seviceability limit states (SLS). The calculation and the analysis was supported by design software SCIA ENGINEER 2017. Structural analysis deals with the design of the reinforced concrete floor slab of 1.PP, beams in 1.PP, selected walls in 1.NP and column in 1.PP and 1.NP. Thework beside this deals with the calculation and design of foundation of the object.
|
|
| |
|
|
Structural assessment of the reinforced concrete chimney
Teplý, Jakub ; Hasala, Ivo (referee) ; Girgle, František (advisor)
The aim of this thesis is assessment of existing condition reinforced concrete factory chimney, who has undergone structural and technical survey, under which was found many failures caused of horizontally tension - significant vertical cracks in the chimney stack. The object of this work will also make appropriate proposals rehabilitation of concrete stack by design prestressed cables monostrand in horizontal direction, grouting open cracks and reprofiling surface of chimney stack.
|
guest ::
