Název: Trip steel specimen preparation for advanced sem and EBSD
Autoři: Ambrož, Ondřej ; Mikmeková, Šárka ; Hegrová, J. ; Aoyama, T.
Typ dokumentu: Příspěvky z konference
Konference/Akce: METAL 2020. International Conference on Metallurgy and Materials /29./, Brno (CZ), 20200520
Rok: 2020
Jazyk: eng
Abstrakt: Modern scanning electron microscopy (SEM) allows observations of specimens with high surface sensitivity. The surface sensitivity is significantly affected by the accelerating voltages. With the development of the scanning electron microscopy, the requirements for the surface quality of samples increase. Metallographic methods originally intended for light microscopy become insufficient. The problem occurs especially with multiphase materials having a fine-grained structure. The investigated TRIP steel consists of a ferritic-bainitic matrix, retained austenite and martensite phases. The sizes of the smallest phases are nanometer units. The volume of residual austenite was determined by X-ray diffraction. The basic preparation of all tested samples involved conventional metallographic grinding and very fine mechanical polishing. One sample was analysed in this state. Other samples were subsequently chemically polished, electropolished and chemical-mechanically polished. The specimens were observed in the SEM using a SE and a BSE detector at low energies immediately after the preparation. An EBSD was performed in the same areas to characterize the retained austenite. Topographical imaging by special AFM, integrated into the SEM, demonstrated that the mechanical polishing results in surface deformation and residual austenite is transformed. All other methods have their specifics and for modern sensitive SEM instruments it is necessary to optimize individual procedures.
Klíčová slova: AFM; EBSD; metallography; SEM; TRIP steel
Číslo projektu: TN01000008
Poskytovatel projektu: GA TA ČR
Zdrojový dokument: METAL 2020. 29th International Conference on Metallurgy and Materials. Proceedings, ISBN 978-80-87294-97-0, ISSN 2694-9296

Instituce: Ústav přístrojové techniky AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: http://hdl.handle.net/11104/0314747

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-432509


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav přístrojové techniky
Konferenční materiály > Příspěvky z konference