guest ::
| Home > Conference materials > Papers > Development of the bulge test equipment for measuring mechanical properties of thin films |
Original title:
Development of the bulge test equipment for measuring mechanical properties of thin films
Authors: Holzer, Jakub ; Pikálek, Tomáš ; Buchta, Zdeněk ; Lazar, Josef ; Tinoco, H.A. ; Chlupová, Alice ; Kruml, Tomáš
Document type: Papers
Conference/Event: METAL 2017: International Conference on Metallurgy and Materials /26./, Brno (CZ), 20170524
Year: 2017
Language: eng
Abstract: The bulge test apparatus designed for the measurement of mechanical material properties of thin films was constructed and tested. The principle of the test is to apply pressure on a free-standing membrane, to measure the membrane shape and to analyse the results. Commercially available silicon nitride (Si3N4) thin films were used for the testing. It is shown that interferometric set-up designed and assembled for the apparatus enables precise determination of 3D shape of the whole membrane, which allows more precise determination of materials parameters compared to measurement of the height of the center of the membrane only. Fit of an analytical formula gives values of Young modulus and residual stress with very good agreement with the literature data. Moreover, FEM model of the bulged membrane was developed. The main aim of the effort is to enable measurement of plastic properties of a thin film of interest, that will be deposited on the Si3N4 membrane with known properties and bulge test will be performed on the bilayer specimen. Subsequently, the material properties of the thin film will be obtained using FEM analysis.
Keywords: bulge test; mechanical properties; thin films
Project no.: LO1212 (CEP), ED0017/01/01
Funding provider: GA MŠk, GA MŠk
Host item entry: METAL 2017. 26th International Conference on Metallurgy and Materials. Conference Proceedings, ISBN 978-80-87294-79-6
Institution: Institute of Physics of Materials AS ČR (web)
Document availability information: Fulltext is available at the institute of the Academy of Sciences.
Original record: http://hdl.handle.net/11104/0287333
Permalink: http://www.nusl.cz/ntk/nusl-387468
The record appears in these collections:
Research > Institutes ASCR > Institute of Physics of Materials
Conference materials > Papers
Authors: Holzer, Jakub ; Pikálek, Tomáš ; Buchta, Zdeněk ; Lazar, Josef ; Tinoco, H.A. ; Chlupová, Alice ; Kruml, Tomáš
Document type: Papers
Conference/Event: METAL 2017: International Conference on Metallurgy and Materials /26./, Brno (CZ), 20170524
Year: 2017
Language: eng
Abstract: The bulge test apparatus designed for the measurement of mechanical material properties of thin films was constructed and tested. The principle of the test is to apply pressure on a free-standing membrane, to measure the membrane shape and to analyse the results. Commercially available silicon nitride (Si3N4) thin films were used for the testing. It is shown that interferometric set-up designed and assembled for the apparatus enables precise determination of 3D shape of the whole membrane, which allows more precise determination of materials parameters compared to measurement of the height of the center of the membrane only. Fit of an analytical formula gives values of Young modulus and residual stress with very good agreement with the literature data. Moreover, FEM model of the bulged membrane was developed. The main aim of the effort is to enable measurement of plastic properties of a thin film of interest, that will be deposited on the Si3N4 membrane with known properties and bulge test will be performed on the bilayer specimen. Subsequently, the material properties of the thin film will be obtained using FEM analysis.
Keywords: bulge test; mechanical properties; thin films
Project no.: LO1212 (CEP), ED0017/01/01
Funding provider: GA MŠk, GA MŠk
Host item entry: METAL 2017. 26th International Conference on Metallurgy and Materials. Conference Proceedings, ISBN 978-80-87294-79-6
Institution: Institute of Physics of Materials AS ČR (web)
Document availability information: Fulltext is available at the institute of the Academy of Sciences.
Original record: http://hdl.handle.net/11104/0287333
Permalink: http://www.nusl.cz/ntk/nusl-387468
The record appears in these collections:
Research > Institutes ASCR > Institute of Physics of Materials
Conference materials > Papers
Record created 2018-11-15, last modified 2022-09-29