Název: Development of the bulge test equipment for measuring mechanical properties of thin films
Autoři: Holzer, Jakub ; Pikálek, Tomáš ; Buchta, Zdeněk ; Lazar, Josef ; Tinoco, H.A. ; Chlupová, Alice ; Kruml, Tomáš
Typ dokumentu: Příspěvky z konference
Konference/Akce: METAL 2017: International Conference on Metallurgy and Materials /26./, Brno (CZ), 20170524
Rok: 2017
Jazyk: eng
Abstrakt: The bulge test apparatus designed for the measurement of mechanical material properties of thin films was constructed and tested. The principle of the test is to apply pressure on a free-standing membrane, to measure the membrane shape and to analyse the results. Commercially available silicon nitride (Si3N4) thin films were used for the testing. It is shown that interferometric set-up designed and assembled for the apparatus enables precise determination of 3D shape of the whole membrane, which allows more precise determination of materials parameters compared to measurement of the height of the center of the membrane only. Fit of an analytical formula gives values of Young modulus and residual stress with very good agreement with the literature data. Moreover, FEM model of the bulged membrane was developed. The main aim of the effort is to enable measurement of plastic properties of a thin film of interest, that will be deposited on the Si3N4 membrane with known properties and bulge test will be performed on the bilayer specimen. Subsequently, the material properties of the thin film will be obtained using FEM analysis.
Klíčová slova: bulge test; mechanical properties; thin films
Číslo projektu: LO1212 (CEP), ED0017/01/01
Poskytovatel projektu: GA MŠk, GA MŠk
Zdrojový dokument: METAL 2017. 26th International Conference on Metallurgy and Materials. Conference Proceedings, ISBN 978-80-87294-79-6

Instituce: Ústav fyziky materiálů AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: http://hdl.handle.net/11104/0287333

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-387468


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav fyziky materiálů
Konferenční materiály > Příspěvky z konference