Název: Simulation of Transonic Flow Through a Mid-Span Turbine Blade Cascade with the Separation-Induced Transition
Autoři: Straka, P. ; Příhoda, Jaromír ; Fenderl, D.
Typ dokumentu: Příspěvky z konference
Konference/Akce: Topical Problems of Fluid Mechanics 2017, Prague (CZ), 20170215
Rok: 2017
Jazyk: eng
Abstrakt: The paper deals with the numerical simulation of the transonic flow through a mid-span turbine blade cascade by means of an in-house code based on the EARSM turbulence model of Hellsten [1] completed by the algebraic transition model of Straka and Příhoda [2]. The simulation using the transition model of Langtry and Menter [3] and Menter et al. [4] implemented in the commercial code ANSYS Fluent was used for the comparison. Simulations were carried out for the transonic regime close to the nominal regime. The flow separation on the suction side of the blade is caused by the interaction of the reflected shock wave with the boundary layer. The attention was focused on the modelling of the transition in the separated flow especially on the modelling of the length of the transition region. Numerical results were compared with experimental results.
Klíčová slova: boundary layer transition; mid-section blade cascade; shock wave interaction
Číslo projektu: GAP101/12/1271 (CEP), TA04020129 (CEP), TA03020277 (CEP)
Poskytovatel projektu: GA ČR, GA TA ČR, GA TA ČR
Zdrojový dokument: Topical Problems of Fluid Mechanics 2017, ISBN 978-80-87012-61-1, ISSN 2336-5781

Instituce: Ústav termomechaniky AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný na externích webových stránkách.
Externí umístění souboru: http://www.it.cas.cz/fm2015/im/admin/showfile/data/my/Papers/2017/34-TPFM2017.pdf
Původní záznam: http://hdl.handle.net/11104/0273594

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-363514


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav termomechaniky
Konferenční materiály > Příspěvky z konference
 Záznam vytvořen dne 2017-08-31, naposledy upraven 2021-11-24.


Není přiložen dokument
  • Exportovat ve formátu DC, NUŠL, RIS
  • Sdílet