Název: Determination of mechanical properties of light alloys and composites by means of Small Punch Testing
Autoři: Bártková, Denisa ; Langer, J. ; Dymáček, Petr ; Válka, L.
Typ dokumentu: Příspěvky z konference
Konference/Akce: Multi-level Design of Advanced Materials, Velké Bílovice (CZ), 2015-05-28 / 2015-05-29
Rok: 2015
Jazyk: eng
Abstrakt: Nowadays, in many testing areas a volume of experimental material is limited (laboratory-scaled volume, semidestructive approach). Therefore many testing techniques on miniature samples were devised. Principle of Small Punch Test (SPT) method is a penetration of small puncher through thin disc placed on a ring until the disc bursts. In dependence on loading mode it can provide information comparable to uniaxial tensile tests (UTT) and/or conventional constant load creep tests. However clarification of relations between SPT and conventional methods is difficult and empirical formulas are non-universal. The aim of this study is to i) evaluate mechanical properties of aluminium and magnesium alloys and its composites by means of SPT, ii) compare SPT results with UTT, iii) validate correlation formulas from literature, iv) propose more advanced approach to define correlation between UTT and SPT. Measurement were carried out at constant deflection rate (SPT-CDR) in two different laboratoires. Results from both laboratories were compared to evaluate the reproducibility of the method. Better results agreement was reached for the ultimate strength measurements. Yield strength results exhibited greater variance. An influence of pre-deformation of the sample on yield strength and deflection at maximum force was also identified. We can conclude, that for quantitative estimation of strength parameters we can use correlation formulas based on materials with similar composition and fracture behaviour.
Klíčová slova: Aluminium Alloys Thin Disc; Magnesium Alloys; Small Punch Test
Číslo projektu: EE2.3.20.0197
Poskytovatel projektu: GA MŠk
Zdrojový dokument: Multi-level Design of Advanced Materials, ISBN 978-80-214-5146-9

Instituce: Ústav fyziky materiálů AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: http://hdl.handle.net/11104/0252731

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-201144


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav fyziky materiálů
Konferenční materiály > Příspěvky z konference
 Záznam vytvořen dne 2015-12-04, naposledy upraven 2021-11-24.


Není přiložen dokument
  • Exportovat ve formátu DC, NUŠL, RIS
  • Sdílet